Laser-induced acoustic desorption (LIAD)/electron ionization (EI) was used to study asphaltene model compounds and asphaltenes derived from North American crude oil in a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer (MS). Successful desorption by LIAD of all model compounds (including a polyphenylated vanadoyl porphyrin) as intact neutral molecules into the mass spectrometer indicates that this method allows the evaporation of most if not all components of asphaltenes into mass spectrometers for further characterization. Electron ionization is a universal ionization method that ionizes all organic compounds. Hence, it is not surprising that all the model compounds studied were successfully ionized by using this method. Furthermore, this method yielded stable molecular ions for all model compounds studied. Because LIAD/EIMS provides MW information for these model compounds, this is almost certainly also true for all components of asphaltenes. Examination of asphaltene samples derived from North American crude oil by using this technique yielded a MW distribution of about 350-1050 Da and provided structural information for asphaltene components.
A mass spectrometric method has been developed for the identification of the carboxylic acid functional group in analytes evaporated and ionized by electrospray ionization (ESI). This method is based on gas-phase ion-molecule reactions of ammoniated ([M + NH4]+) and sodiated ([M + Na]+) analyte molecules with trimethyl borate (TMB) in a modified linear quadrupole ion trap mass spectrometer. The diagnostic reaction involves addition of the deprotonated analyte to TMB followed by the elimination of methanol. A variety of analytes with different func-tionalities were examined, and this reaction was only observed for molecules containing the carboxylic acid functionality. The selectivity of the reaction is attributed to the acidic hydrogen present in the carboxylic acid group, which provides the proton necessary for the elimination of methanol. The diagnostic products are easily identified based on the m/z value of the product ion, which is 72 Th (thomson) greater than the m/z value of the charged analyte, and also by the character-istic isotope pattern of boron. The applicability of this method for pharmaceutical analysis was demonstrated for three nonsteroidal anti-inflammatory drugs: ibuprofen, naproxen, and ketoprofen.
Laser-induced acoustic desorption (LIAD) coupled with a 3-T Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR) allows the simultaneous analysis of both the nonpolar and polar components in petroleum distillates. The LIAD/FT-ICR method was validated by examining model compounds representative of the various classes of polar and nonpolar hydrocarbons commonly found in petroleum. LIAD successfully desorbs all the compounds as intact neutral molecules into the FT-ICR. Electron ionization (EI) at low energies (10 eV) and chemical ionization using cyclopentadienyl cobalt radical cation (CpCo*+) were employed to ionize the desorbed molecules. The EI experiments lead to extensive fragmentation of many of the hydrocarbon compounds studied. However, the CpCo*+ ion ionizes all the hydrocarbon compounds by producing only pseudomolecular ions without other fragmentation, with the exception of one compound (*CH3 loss occurs). Examination of two different petroleum distillate samples revealed hundreds of compounds. The most abundant components have an even molecular weight; i.e., they are likely to contain no (or possibly an even number of) nitrogen atoms.
A mass spectrometric method is presented for the identification of compounds that contain the aliphatic or aromatic N-oxide functional group. This method utilizes gas-phase ion/molecule reactions of tri(dimethylamino)borane (TDMAB), which rapidly derivatizes protonated aliphatic and aromatic tertiary N-oxides, amides, and some amines via loss of dimethylamine in a Fourier transform ion cyclotron resonance mass spectrometer. The mechanism involves proton transfer from the protonated analyte to the borane, followed by addition of the analyte to the boron center and elimination of dimethylamine. The derivatized analytes are readily identified on the basis of their m/z value which is 98 Th (thomson) greater than that of the protonated analyte, and the characteristic boron isotope patterns. SORI-CAD of the product ions (adduct-(CH3)2NH) yields different fragment ions for aliphatic tertiary N-oxides, aromatic tertiary N-oxides, amides, and pyridines. Therefore, these analytes can be identified based on their characteristic fragment ions. This method was tested by examining two drug samples, Olanzapine and Olanzapine-4' N-oxide.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.