Solar energy is readily available in most climates and can be used for water purification. However, solar disinfection of drinking water mostly relies on ultraviolet light, which represents only 4% of the total solar energy, and this leads to a slow treatment speed. Therefore, the development of new materials that can harvest visible light for water disinfection, and so speed up solar water purification, is highly desirable. Here we show that few-layered vertically aligned MoS (FLV-MoS) films can be used to harvest the whole spectrum of visible light (∼50% of solar energy) and achieve highly efficient water disinfection. The bandgap of MoS was increased from 1.3 to 1.55 eV by decreasing the domain size, which allowed the FLV-MoS to generate reactive oxygen species (ROS) for bacterial inactivation in the water. The FLV-MoS showed a ∼15 times better log inactivation efficiency of the indicator bacteria compared with that of bulk MoS, and a much faster inactivation of bacteria under both visible light and sunlight illumination compared with the widely used TiO. Moreover, by using a 5 nm copper film on top of the FLV-MoS as a catalyst to facilitate electron-hole pair separation and promote the generation of ROS, the disinfection rate was increased a further sixfold. With our approach, we achieved water disinfection of >99.999% inactivation of bacteria in 20 min with a small amount of material (1.6 mg l) under simulated visible light.

Health-relevant microorganisms present in natural surface waters and engineered treatment systems that are exposed to sunlight can be inactivated by a complex set of interacting mechanisms. The net impact of sunlight depends on the solar spectral irradiance, the susceptibility of the specific microorganism to each mechanism, and the water quality; inactivation rates can vary by orders of magnitude depending on the organism and environmental conditions. Natural organic matter (NOM) has a large influence, as it can attenuate radiation and thus decrease inactivation by endogenous mechanisms. Simultaneously NOM sensitizes the formation of reactive intermediates that can damage microorganisms via exogenous mechanisms. To accurately predict inactivation and design engineered systems that enhance solar inactivation, it is necessary to model these processes, although some details are not yet sufficiently well understood. In this critical review, we summarize the photo-physics, -chemistry, and -biology that underpin sunlight-mediated inactivation, as well as the targets of damage and cellular responses to sunlight exposure. Viruses that are not susceptible to exogenous inactivation are only inactivated if UVB wavelengths (280-320 nm) are present, such as in very clear, open waters or in containers that are transparent to UVB. Bacteria are susceptible to slightly longer wavelengths. Some viruses and bacteria (especially Gram-positive) are susceptible to exogenous inactivation, which can be initiated by visible as well as UV wavelengths. We review approaches to model sunlightmediated inactivation and illustrate how the environmental conditions can dramatically shift the inactivation rate of organisms. The implications of this mechanistic understanding of solar inactivation are discussed for a range of applications, including recreational water quality, natural treatment systems, solar disinfection of drinking water (SODIS), and enhanced inactivation via the use of sensitizers and photocatalysts. Finally, priorities for future research are identified that will further our understanding of the key role that sunlight disinfection plays in natural systems and the potential to enhance this process in engineered systems. Environmental signicanceThe manuscript provides a comprehensive synthesis of the current understanding of the mechanisms by which sunlight causes damage to microorganisms, ultimately leading to inactivation. This topic is important for understanding the fate and transport of microbiological contaminants in all sunlit surface waters, including fresh and marine ecosystems, as well as engineered treatment systems.

High-efficiency, affordable, and low energy water disinfection methods are in great need to prevent diarrheal illness, which is one of the top five leading causes of death over the world. Traditional water disinfection methods have drawbacks including carcinogenic disinfection byproducts formation, energy and time intensiveness, and pathogen recovery. Here, we report an innovative method that achieves high-efficiency water disinfection by introducing nanomaterial-assisted electroporation implemented by a conducting nanosponge filtration device. The use of one-dimensional (1D) nanomaterials allows electroporation to occur at only several volts, which is 2 to 3 orders of magnitude lower than that in traditional electroporation applications. The disinfection mechanism of electroporation prevents harmful byproduct formation and ensures a fast treatment speed of 15,000 L/(h·m(2)), which is equal to a contact time of 1 s. The conducting nanosponge made from low-cost polyurethane sponge coated with carbon nanotubes and silver nanowires ensures the device's affordability. This method achieves more than 6 log (99.9999%) removal of four model bacteria, including Escherichia coli, Salmonella enterica Typhimirium, Enterococcus faecalis, and Bacillus subtilis, and more than 2 log (99%) removal of one model virus, bacteriophage MS2, with a low energy consumption of only 100 J/L.