The melting point of triacylglycerides (TAGs) under atmospheric pressure depends on both the fatty acid composition and crystalline structure of the polymorphic state, which are influenced by the temperature treatment history of the TAG. In this contribution, the additional effect of high hydrostatic pressure is described. Samples were placed in a temperature-controlled cell and pressurized up to 450 MPa. The phase transition was investigated either by perpendicular light scattering and transmission or with a polarized-light microscope. The high-pressure polarized-light microscope allows a precise determination of the melting point. The investigated TAGs showed a significant nonlinear increase of the melting point with pressure. Light scattering and transmission were used to observe the phase change in the high-pressure cell. Similar to supercooling in temperature-induced phase transition, we found a dramatic increase of the delay time in our pressure-induced solidification. Even the dependency of this induction time on the control parameter pressure was similar to that in temperature-driven crystallization. We propose that different crystalline structures may be obtained by superpressuring instead of supercooling.

No abstract

Gene delivery vectors based on adeno-associated virus (AAV) have significant therapeutic potential, but much room for improvement remains in the areas of vector engineering and production. AAV production requires complementation with either helper virus, such as adenovirus, or plasmids containing helper genes, and helper virus-based approaches have distinct advantages in the use of bioreactors to produce large quantities of AAV vectors for clinical applications. However, helper viruses must eventually be inactivated and removed from AAV preparations to ensure safety. The current practice of thermally inactivating adenovirus is problematic as it can also inactivate AAV. Here, we report a novel method using high hydrostatic pressure (HHP) to selectively and completely inactivate helper adenovirus without any detectable loss of functional AAV vectors. The pressure inactivation kinetics of human adenovirus serotype 5 and the high-pressure stabilities of AAV serotypes 2 and 5 (AAV2, AAV5), which were previously unknown, were characterized. Adenovirus was inactivated beyond detection at 260 MPa or higher, whereas AAV2 was stable up to approximately 450 MPa, and surprisingly, AAV5 was stable up to at least 700 MPa. The viral genomic DNA of pressure-inactivated AAV2 was made sensitive to DNAse I digestion, suggesting that gross changes in particle structure had occurred, and this hypothesis was further supported by transmission electron microscopy. This approach should be useful in the laboratory- and clinical-scale production of AAV gene delivery vectors. Moreover, HHP provides a tool for probing the biophysical properties of AAV, which may facilitate understanding and improving the functions of this important virus.

In this study, the first visualization of distributed phase change effects and thermodynamical properties under high pressure have been carried out by means of HP‐DPIV and HP‐DPIT (High Pressure Digital Particle Image Velocimetry and Thermography) methods [1]. The main objective of this study was to investigate the thermofluiddynamical behaviour in the high pressure cell during Pressure Induced Thawing of Ice I, Pressure Shift Freezing of Ice I and Pressure Assisted Thawing of Ice III. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)

High-pressure treatment is a promising option for improving mechanical properties and processing parameters of fat-containing products. To identify optimum processing windows, melting curves, crystallization kinetics, and pathways for transferring the optimized structures to atmospheric pressure need to be known. Here, we provide melting curves of different polymorphic forms of triolein in the industrially relevant pressure range. The melting points of different polymorphic forms are detected optically in thin samples during stepwise changes of pressure or temperature. For cross-nucleated spherulites, this method allows determining the respective melting points of nuclei and overgrown structures. Tracing the melting curves to atmospheric pressure confirms previous identification of the polymorphic forms at high pressure and enables identifying a previously reported but undefined structure as the β 2-form. Employing Raman spectroscopy, it is confirmed that the polymorph remained unaltered during the pressure release. With increasing pressure, the melting curves of the different polymorphic forms approach each other until they successively merge at the highest pressure levels studied.