Background: Ileitis is a wasting disease of pigs. Clinical symptoms are diarrhea in growing pigs, wasting and reduced performance. Ileitis is ubiquitous in pig producing countries all around the world. It is estimated that the economic losses caused by the disease are USD 4.65 per fattening pig, and American pig farmers lose USD 56.1 million annually. It has become necessary to develop a slaughterhouse ileitis monitoring method that is simple, feasible to perform at modern slaughter lines, leads to immediate results and is cost effective. The practical experiences of applying the method are presented below. Methods: Our studies were performed on pig herds and slaughterhouses in Central European countries (Hungary, Romania, Poland, Croatia, and Slovakia). Experiences were evaluated based on visual and palpation. The results of our investigations were evaluated by a scoring method. Authors made histological and immunohistochemical examinations of investigated ileums. The hypothetic economic losses due to the disease in each farm were determined by estimating the loss of profit according to Holtkamp’s presentation in 2019. Results: The essentials of the method we have developed are: it can be performed during slaughterhouse processing, it does not interfere with or make it impossible to carry out normal technological processes, and the results of the procedure are correlated with the results of other laboratory diagnostic tests for ileitis (histology, immunohistochemistry, herd serology, fecal PCR). It is noteworthy that the results of the method can be used to immediately estimate the impact of Lawsonia intracellularis infection on the performance of the herd from which the slaughter animals come. Conclusion: Using the results of the slaughtered pigs’ visual and tactile examination at the slaughterhouse, the magnitude of the loss caused by Lawsonia intracellularis infection can be estimated quickly and accurately, and the return on investment of the strategy to be applied can be accurately planned.

No abstract

The verification of different plate bending problems require a punctual measurement method of the bent shape. However, with a proper curvature measurement procedure the calculations can be made more accurate. This is due to the workaround this method provides by neglecting the inaccuracies of the beam theory and the tensile tests, measuring directly the function between the curvature and bending moment for a given sheet metal. The measurements in this paper are made with the help of a digital camera and telephotographic lens. The evaluations of these images are compared to the results obtained from the Euler-Bernoulli beam theory. While the results regarding the curvature measurements have a significant deviation, the shape of the plate is in good agreement with the numerical calculations.

This work deals with the analysis of the free vibration problem of elastic delaminated composite beams. The work mainly consists of a model development and improvement stage based on the first-order shear deformable beam theory. A general model is developed taking the bending-extensional coupling into account. The specified problem is a built-in beam with free end, and one of the novelties of this work is the consideration of the fact that a built-in beam cannot be fixed rigidly in reality. Thus, a Winkler-type elastic foundation is applied along the built-in length. The total potential energy and the governing equations of the delaminated and intact parts of the beam are also captured. The problem is solved in two ways: analytically and numerically by using the finite element method, respectively. Applying the developed models the natural frequencies, mode shapes as well as the stress resultants are determined. The comparison of natural frequencies to those measured experimentally shows that the built-in length resting on Winkler-type elastic foundation influences significantly the agreement between model and experiment. In the final stage, the parametric excitation phenomenon taking place in the delaminated part is analyzed using a local model and the harmonic balance method. The dynamic buckling is characterized by some stability diagrams, and it is shown that the applied model is very sensitive to the frequency leading to somewhat controversial critical amplitudes compared to measurements.

No abstract