ObjectivesTo compare traditional plaster casts, digital models and 3D printed copies of dental plaster casts based on various criteria. To determine whether 3D printed copies obtained using open source system RepRap can replace traditional plaster casts in dental practice. To compare and contrast the qualities of two possible 3D printing options – open source system RepRap and commercially available 3D printing.Design and settingsA method comparison study on 10 dental plaster casts from the Orthodontic department, Department of Stomatology, 2nd medical Faulty, Charles University Prague, Czech Republic.Material and methodsEach of 10 plaster casts were scanned by inEos Blue scanner and the printed on 3D printer RepRap [10 models] and ProJet HD3000 3D printer [1 model]. Linear measurements between selected points on the dental arches of upper and lower jaws on plaster casts and its 3D copy were recorded and statistically analyzed.Results3D printed copies have many advantages over traditional plaster casts. The precision and accuracy of the RepRap 3D printed copies of plaster casts were confirmed based on the statistical analysis. Although the commercially available 3D printing enables to print more details than the RepRap system, it is expensive and for the purpose of clinical use can be replaced by the cheaper prints obtained from RepRap printed copies.ConclusionsScanning of the traditional plaster casts to obtain a digital model offers a pragmatic approach. The scans can subsequently be used as a template to print the plaster casts as required. Using 3D printers can replace traditional plaster casts primarily due to their accuracy and price.

No abstract

This paper brings an innovative processing route of manganese deep-sea nodules, which results in completely new grades of alloys. Deep-sea nodules were processed by aluminothermic method without the extraction of individual elements, producing complexly alloyed manganese-based “natural alloys”. Three levels of the amount of aluminum were used for the aluminothermic reduction, and hence the alloys differ strongly in the amount of aluminum, which has a significant effect on their phase composition. The alloys have very high wear resistance, comparable with tool steel. The disadvantage of low-aluminum alloy is the susceptibility to local thermal cracking during friction, which occurs especially in the case of a dry sliding wear against the static partner with low thermal conductivity.

SUMMARY Common carp ( Cyprinus carpio ) aquaculture is one of the most important and rapidly growing productions around the world. However, for consumers, carp is often not acceptable due to its distinctive colour and odour. In this study, we investigated the effects of bleeding of common carp on fillet quality. The obtained results show that carp bleeding by cutting the gill arches is an effective way of reducing the total haem content, which here decreased from (9.6±1.6) in unbled carp to (2.34±0.8) μmol/kg of haemoglobin in bled carp. Furthermore, fillets from bled carp showed reduced formation of primary and secondary lipid oxidation products and growth of microorganisms during 12 days of refrigerated aerobic storage. On the last day of storage, the amount of lipid hydroperoxides decreased from (88.9±4.2) in unbled to (62.1±2.9) μmol/kg of cumene hydroperoxide in bled carp, TBARS decreased from (4.2±0.5) in unbled to (2.6±0.4) μmol/kg of malondialdehyde in bled carp, mesophilic and psychrotrophic bacteria count decreased from (6.4±0.1) and (6.2±0.3) log CFU/g in unbled to (4.0±0.2) and (4.2±0.2) log CFU/g in bled carp, respectively. These raw bled fillets showed increased lightness L* , and reduced redness a* and yellowness b* compared to unbled fillets. Sensory analysis showed improved colour, odour and overall acceptability of bled raw fillets. Overall, bleeding improves the quality of carp fillets. Thus, inclusion of bleeding into processing of carp fillets has the potential to improve their acceptance by consumers and prolong their shelf-life.

No abstract