Uniplaner orientation of a particular crystal plane along the surface of a film was investigated for poly (vinyl alcohol) (PVA) film prepared by a coagulation bath with concentrated aqueous solution containing 100 ∼ 300g of Na2SO4 against 1 ℓ of water. The orientation distribution functions of the three crystallographic principal axes of the dried films were obtained by the X‐ray diffraction technique. The same treatment was carried out for the films prepared by stretching biaxially of the fresh gel and then by drying the resultant fresh gel. The very high preferential orientation of the crystal chain axes and amorphous chain segments could be realized by the biaxially elongation. Accordingly, the techniques were applied to the biaxially stretching of chitosan and PVA blend films with high Young's modulus. The planer orientation of the chain axes of chitosan and PVA crystallites could be confirmed. The morphology of the film surface was estimated by measurements of contact angle and electron spectroscopy for chemical analysis. The results suggested that the admixture of chitosan decreases wet ability of the specimen and this tendency was slightly enhanced by the biaxially elongation.