The acoustic black hole (ABH) has been developed in recent years as an effective, passive, and lightweight method for attenuating bending wave vibrations in beams and plates and reducing the sound radiation and structural-acoustic response of structures. The ABH effect utilizes a local change in the plate or beam thickness to reduce the bending wave speed and increase the transverse vibration amplitude. Attaching a viscoelastic damping layer to the ABH results in effective energy dissipation and vibration reduction. Surface-averaged mobility and radiated sound power measurements were performed on an aluminum plate containing an array of 20 two-dimensional ABHs with damping layers and compared to a similar uniform plate. Detailed laser vibrometer scans of an ABH cell (including the ABH and surrounding homogeneous plate) were also performed to analyze the vibratory characteristics of individual ABH cells and compared with mode shapes calculated using finite elements. The results showed that the surface-averaged mobility was reduced by up to 14 dB for the fully damped ABH plate compared to a uniform reference plate while also reducing the mass of the plate. The results demonstrated that the dynamics of plates with embedded ABHs can be characterized by low, mid, and high frequency ranges, with low-order local ABH modes contributing significantly to low frequency ABH performance. The effects of damping layer thickness and diameter were also investigated to assess ABH performance optimization. It was shown that the damping layer can have the added benefit of mass loading the ABH and enhancing low frequency performance. The results will be useful for designing the low frequency performance of future ABH systems and describing ABH performance in terms of design parameters.

In recent years, the concept of the Acoustic Black Hole has been developed as an efficient passive, lightweight absorber of bending waves in plates and beams. Theory predicts greater absorption for a higher thickness taper power. However, a higher taper power also increases the violation of an underlying theory smoothness assumption. This paper explores the effects of high taper power on the reflection coefficient and spatial change in wave number and discusses the normalized wave number variation as a spatial design parameter for performance, assessment, and optimization.

No abstract

In recent years acoustic black holes (ABHs) have been developed and demonstrated as an effective method for developing lightweight, high loss structures for noise and vibration control. ABHs employ a local thickness change to tailor the speed and amplitude of flexural bending waves and create concentrated regions of high strain energy which can be effectively dissipated through conventional damping treatments. These regions act as energy sinks which allow for effective broadband vibration absorption with minimal use of applied damping material. This, combined with the reduced mass from the thickness tailoring, results in a treated structure with higher loss and less mass than the original. In this work, the transmission loss (TL) of plates with embedded ABHs was investigated using experimental and numerical methods in order to assess the usefulness of ABH systems for TL applications. The results demonstrated that damped ABH plates offer improved performance compared to a uniform plate despite having less mass. The result will be useful for applying ABHs and ABH systems to practical noise and vibration control problems.

Acoustic black holes (ABHs) have been explored and demonstrated to be effective passive treatments for broadband noise and vibration control. Performance metrics for assessing damping concepts are often focused on maximizing structural damping loss factors. Optimally performing damping treatments can reduce the resonant response of a driven system well below the direct field response. This results in a finite structure whose vibration input-output response follows that of an infinite structure. The vibration mobility transfer functions between locations on a structure can be used to assess the structure's vibration response phase, and compare its phase response characteristics to those of idealized systems. This work experimentally explores the phase accumulation in finite plates, with and without embedded grids of ABHs. The measured results are compared and contrasted with theoretical results for finite and infinite uniform plates. Accumulated phase characteristics, their spatial dependence and limits, are examined for the plates and compared to theoretical estimates. The phase accumulation results show that the embedded acoustic black hole treatments can significantly enhance the damping of the plates to the point that their phase accumulation follows that of an infinite plate.