Large projects based on applied superconductivity, such as particle accelerators, tokamaks or SMES, require powerful and complex helium cryogenic systems, the cost of which represents a significant, if not dominant fraction of the total capital and operational expenditure. It is therefore important to establish guidelines and scaling laws for costing such systems, based on synthetic estimators of their size and performance. Although such data has already been published for many years, the experience recently gathered at CERN with the LEP and LHC projects, which have de facto turned the laboratory into a major world cryogenic center, can be exploited to update this information and broaden the range of application of the scaling laws. We report on the economics of 4.5 K and 1.8 K refrigeration, cryogen distribution and storage systems, and indicate paths towards their cost-to-performance optimisation. ABSTRACTLarge projects based on applied superconductivity, such as particle accelerators, tokamaks or SMES, require powerful and complex helium cryogenic systems, the cost of which represents a significant, if not dominant fraction of the total capital and operational expenditure. It is therefore important to establish guidelines and scaling laws for costing such systems, based on synthetic estimators of their size and performance. Although such data has already been published for many years, the experience recently gathered at CERN with the LEP and LHC projects, which have de facto turned the laboratory into a major world cryogenic center, can be exploited to update this information and broaden the range of application of the scaling laws. We report on the economics of 4.5 K and 1.8 K refrigeration, cryogen distribution and storage systems, and indicate paths towards their cost-to-performance optimisation.

This paper presents a process and control simulator for industrial helium cryogenic plants controlled by Programmable Logic Controllers (PLC). This simulator can be used for different purposes such as operator training, test of the PLC programs or the optimization of the plant. The different component models used in the simulator are detailed and explained. Various large scale cryogenic plants used for the particle accelerator LHC (Large Hadron Collider) at CERN have been modeled and simulated. The good agreement between the simulation results and the dynamic behaviour of real plants is demonstrated with experimental results. Various discussions complete the presentation.

The cooling capacity for the superconducting magnets in the Large Hadron Collider (LHC) at the European Laboratory for Particle Physics, CERN will be provided by eight helium refrigerators serving the eight 3.3 km long machine sectors. Of these eight refrigerators, four are already existing and are currently used for the Large Electron Positron Collider (LEP) project. These existing refrigerators have to be modified to serve the requirements for the LHC. Four new refrigerators providing cooling capacity down to 4.5 K will be added. All eight 4.5 K refrigerators will be completed by 1.8 K cooling stages. This presentation recalls the cryogenic architecture of the LHC, the constraints in process design resulting from it and from the desired capacity for steady state and transient operation. It then describes how these requirements were expressed in the technical specification for the four new 4.5 K refrigerators to be delivered between the years 2000 and 2002. ABSTRACTThe cooling capacity for the superconducting magnets in the Large Hadron Collider (LHC) at the European Laboratory for Particle Physics, CERN will be provided by eight helium refrigerators serving the eight 3.3 km long machine sectors. Of these eight refrigerators, four are already existing and are currently used for the Large Electron Positron Collider (LEP) project. These existing refrigerators have to be modified to serve the requirements for the LHC. Four new refrigerators providing cooling capacity down to 4.5 K will be added. All eight 4.5 K refrigerators will be completed by 1.8 K cooling stages. This presentation recalls the cryogenic architecture of the LHC, the constraints in process design resulting from it and from the desired capacity for steady state and transient operation. It then describes how these requirements were expressed in the technical specification for the four new 4.5 K refrigerators to be delivered between the years 2000 and 2002.

No abstract

No abstract