No abstract

Hydroxymethylfurfural (HMF) is a high‐value platform chemical derived from renewable resources. In recent years, considerable efforts have been made to produce HMF also at industrial scale, which still faces some challenges regarding yield as well as sustainable and economic process designs. This critical Review evaluates the industrial process development of sustainable biomass conversion to HMF. Qualitative and quantitative guidelines are defined for the technological assessment of the processes described in patent literature. The formation of side products, difficulties in the separation and purification of HMF as well as catalyst regeneration were identified as major challenges in the HMF production. A first small‐scale, commercial HMF production plant with a capacity of 300 t HMF per year has been operating in Switzerland since 2014.

Lignin phenol formaldehyde (LPF) resols were produced using depolymerized lignin fractions at various levels of phenol substitution (50 to 70 wt %). To produce monomeric-rich (BCD-oil) and oligomeric (BCD-oligomers) bio-based phenolic compounds, softwood kraft lignin was base-catalysed degraded. These base-catalysed depolymerized (BCD) building blocks were further used to substitute phenol in the synthesis of phenolic resins and were characterized in detail (such as viscosity, free formaldehyde and phenol content, chemical composition, curing and bonding behaviour). The adhesive properties were compared to a phenol formaldehyde (PF) reference resin and a LPF with untreated kraft lignin. The resins synthesized with the two depolymerized lignin types differ significantly from each other with increasing phenol substitution. While with LPF-BCD-oligomers the viscosity increases and the bonding strength is not effected by increasing lignin content in the resin, a reduction of these properties could be observed with LPF-BCD-oil. Furthermore, LPF-BCD-oil showed similar curing behaviour and ultimate strength as the reference LPF. Adhesive bonds made using LPF-BCD-oligomers exhibited similar strength to those made using PF. Compared to the reference resins, it has been demonstrated that modified renewable lignin based phenolic components can be an equally performing alternative to phenol even for high degrees of substitution of 70%.

The concept of bioeconomy supports the diversification strategies of forest-based industries to create new value chains and contribute to economic growth and sustainability. The use of side streams or by-products of the pulp and paper industry (PPI) is seen as a promising approach. In line with this, the idea of substituting fossil-based materials and products is frequently discussed. One such example is the use of lignin as a bio-based alternative for fossil-based phenols. Lignin-based products not only have to fulfil identical technical requirements as their fossil-based counterparts, they are also expected to be more sustainable. This study conducts an integrated hotspot analysis of two lignin valorisation pathways during R&D. The analysis considers the provision of technical kraft lignin as a by-product of a state-of-the-art kraft pulp mill, followed by valorisation, either via solvent fractionation or via base-catalysed depolymerisation (BCD), and the final application of the valorised lignins in phenol formaldehyde resins. As a two-step approach, first of all, the environmental hotspots (e.g., energy-intensive process steps) along the valorisation pathways are identified. Secondly, a variation analysis is carried out, which involves the identification of sustainability levers (e.g., selection of solvents). Identifying those levers at an early research stage helps to support the R&D process towards sustainable product development.