The soil-structure interface problem is an important part of soil-structure interaction research. These problems are mostly three-dimensional space problems, which is more complex to solve. In this paper, reduced stress and strain rate vectors are incorporated into the explicitly granular hypoplastic model by considering the plane strain state precisely. In addition, considering the important influence of roughness on the mechanical properties of contact surface, an improved hypoplastic model is established by incorporating the influence of roughness into the hypoplastic model, and the applicability of the new improved model is validated by comparing with the simulation results of the Mohr–Coulomb model, the explicitly granular hypoplastic models, and the experimental data. The results indicate that the improved model can be utilized to reflect the nonlinearity of the mechanical properties of the contact surface, which is in good agreement with the experimental data.

This paper proposes analytical solutions to the soil deformation around a cylindrical cavity under drained conditions. Analytical procedures are used to predict the degree of interaction between cavities and ground surface loads based on mathematical theorems. The stresses applied at the boundary condition induce the ground motions around the cylindrical cavity wall. Additionally, the Airy stresses are obtained through mathematical derivatives and integrations by combining the Fourier analysis test with the Navier equations. Next, we established a schematic representation of the horizontal and vertical displacement related to the corrective shear model to obtain insight into the intensity and directions of ground stresses. The resulting transformations include displacement, shear, and deviatoric stresses applied to the cylindrical cavity wall. These data can be used as input parameters for numerical simulations to alternatively solve the groundmass redistribution problems and calibrate the horizontal stress of drained soil conditions.

Settlements on the ground surface often relate to excavating an underground cavity in cities. Movement on the ground surface can create a void between the wall of the cylindrical cavity and the lining. Thus, this study proposes an approximate solution under undrained conditions, based on the relationship between the empirical and analytical methods for predicting ground settlement around a cylindrical cavity. Based on mathematical formulas, the results obtained by the geometrical representation are then associated with the experimental data. The study revealed that the settlement prediction is related either to ground surface loads or to the ground failure point. The expansion of the cylindrical cavity is solved as a linear elasticity problem using a system of first-order ordinary differential equations containing two components in the Cartesian coordinates. The stress distribution around the cylindrical cavity is evaluated based on a biaxial force. The proposed approaches show that the results (empirical and analytical) obtained are approximately similar. Hence, the relationship between the two methods can be best suited for predicting the settlement around a cylindrical cavity by evaluating both the maximum settlement and the maximum surface displacement.