The main aim of the present work is to investigate, through the strain energy density method, the fatigue behaviour of high strength welded joints realised employed in hydraulic runner blades. The geometries, found in literature, present the welding bead machined in order to have no geometrical discontinuities in the specimen realising a wide fitting radius between the two welded plates; the only critical geometrical discontinuity in the specimen is given by the lack of penetration that leads to an internal crack-like defect. The specimens presented failure both from the weld toe and from the weld root depending on the amount of welding penetration. The results, summarised in this work with the strain energy density method, show clearly the possibility to consider a unique master curve for this kind of joints regardless of the failure initiation point. Acquiring, through a finite element model, the strain energy density value both at the weld toe and at the weld root and comparing them, the method is proved to be adequate to detect the most critical area of the joint. A first fatigue master curve in terms of cyclic averaged strain energy density value is provided for the fatigue design of high strength welded joints.

No abstract

No abstract

No abstract

No abstract