In this study, stainless steel (SS) filaments are wrapped in Ge fibers to form core-spun yarns. The yarns along with 500 D polyester (PET) fibers undergo weaving, thereby forming functional woven fabrics. The experiment is composed of two parts:yarns and fabrics. The yarns are twisted with TPI of 8, 9, 10, 11, and 12, and then tested for tensile strength and tensile elongation. The yarns possess mechanical properties that are dependent on the TPI—the higher the TPI, the better the mechanical properties. The maximal mechanical properties occur when the core-spun yarns are made of 12 TPI where the maximal tensile strength is 5.26 N and the lowest elongation is 43.2%. As for the functional woven fabrics, they are made of Ge/SS core-spun yarns as the weft yarns and 500 D PET yarns as the warp yarns. The tensile strength, tensile elongation, negative ion release, electromagnetic interference shielding effectiveness (EMI SE), and air permeability tests are conducted, determining the optimal woven fabrics. The 12 TPI core-spun yarns provide the woven fabrics with the maximal tensile strength of 153.6 N and the optimal elongation at break of 10.08%. In addition, the woven fabrics made with 8 or 9 TPI core-spun yarns exhibit an optimal EMI SE of 41 dB, an optimal air permeability of 212 cm3/cm2/s, and an optimal release amount of negative ion of 550–600 ions/cc. The proposed woven fabrics have a broad range of applications, such as functional garments and bedding.

In this study, a low-melting-point polyester nonwoven fabric (L), a nylon spacer fabric (N), and a carbon fiber woven fabric (C) are laminated in different orders and then needle-bonded at a depth of 15.0 cm to form NLC, NLN, CLC, and CLN composites with a sandwich construction. Regardless of the lamination order, four composite types exhibit high tensile strengths and tearing strengths. Based on the ASTM D4935-18 test standard, the electromagnetic wave shielding measurement is conducted in a frequency range of 1~3 GHz. The two groups—NLC and CLN—demonstrate different electromagnetic wave shields, which are −45~−65 dB for the former, and −60 dB for the latter. According to FTTS-FA-003, in the specified requirements of the test method for electromagnetic shielding textiles, the proposed composites achieve level III, which is the highest standard, and are thus qualified for use in the aviation, construction, and commerce fields.

This study investigated eco-friendly antibacterial medical protective clothing via the nonwoven process and characteristic evaluations. Firstly, Tencel® fibers and low melting point polyester (LMPET) fibers (re-sliced and granulated from recycled PET bottles) were mixed at different ratios and then needle punched at diverse needle rolling depths. The influences of manufacturing parameters on the Tencel®/LMPET nonwoven fabrics were examined in terms of mechanical properties, water vapor transmission rate, and stiffness. Next, Tencel®/LMPET nonwoven fabrics were combined with thermoplastic polyurethane (TPU)/Triclosan antibacterial membranes that contained different contents of triclosan using melt processing technology. The resulting Tencel®/LMPET/TPU/Triclosan composites were characterized via different measurements; an optimal bursting strength of 86.86 N, an optimal horizontal tensile strength of 41.90 N, and an optimal stiffness along the MD and CD of 8.60 cm were recorded. Furthermore, the Tencel®/LMPET/TPU/Triclosan composites exhibited a distinct inhibition zone in the antibacterial measurement, and the hydrostatic pressure met the requirements of the EN 14126:2003 and GB 19082-200 disposable medical protective gear test standards.