This work aims to develop a multihole atmospheric pressure plasma jet (APPJ) device to increase the plasma area and apply it to a continuous seed treatment system. Broccoli seed was used to study the effects of an atmospheric pressure plasma jet on seed germination and growth rate. An argon flow rate of 4.2 lpm, a plasma power of 412 W, and discharge frequency of 76 kHz were used for seed treatment. The contact angle decreased strongly with the increase in treatment time from 20 s to 80 s. The broccoli seed’s outer surface morphology seemed to have been slightly modified to a smoother surface by the plasma treatment during the treatment time of 80 s. However, the cross-sectional images resulted from Synchrotron radiation X-ray tomographic microscopy (SRXTM) confirmed no significant difference between seeds untreated and treated by plasma for 80 s. This result indicates that plasma does not affect the bulk characteristics of the seed but does provide delicate changes to the top thin layer on the seed surface. After seven days of cultivation, the seed treated by plasma for 30 s achieved the highest germination and yield.

A low-pressure capacitively coupled discharge was used to study antimicrobial treatment in herbal tea. Ambient air with a relative humidity of 40% was used as a precursor gas and fed into the chamber via a perforated power electrode. An electrical discharge plasma was produced at a radio frequency of 10 kHz and power of 80 W. The operating pressure during treatment was kept constant at 260 Pa. The target microorganisms, Escherichia coli and Staphylococcus aureus, isolated from the herbal tea were inoculated on nutrient agar petri dishes and exposed to the plasma for 0.5, 1.0, 1.5, and 2.0 min. All treatments were carried out in triplicate for different exposure times to calculate the D-value by the enumeration method. D-values of 0.73 and 0.67 min were obtained corresponding to E. coli and S. aureus reduction, respectively.