Pyrolysis conditions have a substantial impact on the properties of the resulting char and, consequently, on the kinetics of the gasification process. The aim of this study was to determine the impact of coal pyrolysis on the gasification stage. By applying the thermogravimetric method, kinetic analyses of CO 2 gasification of chars derived from Polish "Janina" coal were conducted. Gasification examinations were performed for chars prepared earlier in an argon atmosphere at various heating rates, which, after cooling, were subjected to CO 2 gasification (indirect char gasification). Examinations were also carried out in the case of chars formed during heating of coal samples in a CO 2 atmosphere (direct char gasification). Samples of chars were gasified in non-isothermal conditions of up to 1100 °C under 0.1 MPa pressure at various heating rates. The char gasification reaction order with CO 2 was determined with the use of the Coats−Redfern method, and it can be assumed that it is a first-order reaction. The activation energy and pre-exponential factor were calculated using two first-order models: Coats−Redfern method and Senum−Yang method. The results were subsequently compared to kinetic parameters calculated on the basis of the modelfree isoconversional method combined with the model-dependent Coats−Redfern method. Despite the differences in values of kinetic parameters obtained from the use of a given model, all results confirmed that the method of char preparation has an influence on the gasification stage and direct char gasification is more favorable. Activation energy obtained from the use of models based on the first-order reaction ranged between 275 and 296 kJ/mol for direct gasification of chars, while the chars gasified indirectly between 307 and 342 kJ/mol, depending upon the heating rate that was used. The model-free isoconversional method confirmed these results. The values for chars gasified directly amounted to E a = 257−277 kJ/mol, and the values for indirect char gasification obtained by the pyrolysis process at heating rates of 3, 10, and 20 K/min amounted to E a = 280−291, 287−309, and 289−305 kJ/mol, respectively.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.