A shaking table test of a three-story reinforced concrete (RC) building was conducted. The tested building is vertically irregular because of the first story’s elevated height and the third story’s added RC walls. In addition to far-field ground motions, near-fault ground motions were exerted on this building. A numerical model of the three-story building was constructed. Comparing with the test results indicates that the numerical model is satisfactory for simulating the seismic response of the three-story building. This validated numerical model was then further applied to look into two issues: the effective section rigidities of RC members and the effects of near-fault ground motions. The study results show the magnitude of the possible discrepancy between the actual seismic response and the estimated seismic response, when the effective section rigidities of the RC members are treated as in common practice. An incremental dynamic analysis of the three-story RC building subjected to one far-field and one near-fault ground motion, denoted as CHY047 and TCU052, respectively, was conducted. In comparison with the far-field ground motion, the near-fault ground motion is more destructive to this building. In addition, the effect of the selected near-fault ground motion (i.e. TCU052) on the building’s collapse is clearly identified.

No abstract

No abstract

No abstract

The old existing reinforced concrete (RC) structures in Taiwan are susceptible to severe damage under earthquakes because of the soft-story mechanism. Moreover, the effects of near-fault ground motions often contain a long period of velocity pulse and permanent ground displacement. This study is based on the tri-axial shaking table test conducted at the National Center for Research on Earthquake Engineering in Taiwan and a series of seismic performance evaluations of a non-ductile RC structure in Taiwan. Finite element analysis (FEA) will be conducted to simulate the linear and nonlinear behavior of the seven-story building. This accommodates the damage plasticity model for concrete and the elastic-perfectly plastic model for reinforcement. Comparison of the results between the experimental test and numerical model showed that the similarity of the vibration period has a great influence on the simulation results. The findings showed that the data of acceleration and displacement behavior corresponded with the experimental results in a satisfactory margin. Also, the damage mode is very similar to the shaking table test results. The study found that using FEA can satisfactorily simulate the seismic performance of mid-rise buildings under a near-fault earthquake.