The shuttling behavior and sluggish conversion kinetics of the intermediate lithium polysulfides (LiPSs) represent the main obstructions to the practical application of lithium–sulfur (Li–S) batteries. Herein, an anion‐deficient design of antimony selenide (Sb2Se3−x) is developed to establish a multifunctional LiPS barrier toward the inhibition of polysulfide shuttling and enhancement of battery performance. The defect chemistry in the as‐developed Sb2Se3−x promotes the intrinsic conductivity, strengthens the chemical affinity to LiPSs, and catalyzes the sulfur electrochemical conversion, which are verified by a series of computational and experimental results. Attributed to these unique superiorities, the obtained LiPS barrier efficiently promotes and stabilizes the sulfur electrochemistry, thus enabling excellent Li–S battery performance, e.g., outstanding cyclability over 500 cycles at 1.0 C with a minimum capacity fading rate of 0.027% per cycle, a superb rate capability up to 8.0 C, and a high areal capacity of 7.46 mAh cm−2 under raised sulfur loading. This work offers a defect engineering strategy toward fast and durable sulfur electrochemistry, holding great promise in developing practically viable Li–S batteries as well as enlightening the material design of related energy storage and conversion systems.

This article is the first report on a phthalonitrile monomer containing vinyls in the main chain.

A novel pyridine-containing aromatic phthalonitrile monomer, 2,6-bis [4-(3,4-dicyanophenoxy)benzoyl]pyridine (BCBP) was synthesized from the nitro displacement of 4-nitrophthalonitrile by the phenoxide of 2,6-bis (4-hydroxybenzoyl)pyridine (BHBP). 4-(Aminophenoxy) phthalonitrile (APPH) was selected to promote the curing reaction, and the curing behavior has been investigated by differential scanning calorimetric (DSC), suggesting a wide processing window about 64 8C. Different curing additive concentrations resulted in polymers with different crosslinking degrees and subsequently influenced the performance of resins. The resulting BCBP polymer exhibited high glass transition temperatures exceeding 400 8C, outstanding thermo-oxidative stability with weight retention of 95% at 530 8C, indicating a significant improvement in thermal properties endowed by pyridine units. Additionally, it also showed a lower overall water absorption after submersion in boiling water for 50 hours.

No abstract

The pyrazine-based oligomeric phthalonitrile (PN) monomer, 2,6-bis[3-(3,4-dicyanophenoxy)phenoxy]pyrazine (BCPP), was synthesized from the reaction of an excess amount of resorcinol with 2,6-dichloropyrazine in the presence of potassium carbonate, followed by end-capping with 4-nitrophthalonitrile in a two-step, one-pot reaction. 4-(Aminophenoxy)phthalonitrile was applied to promote the curing reaction. The curing behavior was investigated by differential scanning calorimetry and rheological behavior, showing a wide processing window of 94°C, a complex viscosity of less than 1.5 Pa·s and a lower reaction activation energy of 32.57 kJ mol−1. The structure of the BCPP monomer was confirmed by Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. The unit cell was determined to be tetragonal system by wide-angle X-ray diffraction. The monomer was cured to yield cross-linked polymers, which exhibited a high initial storage modulus, excellent glass transition temperature, outstanding thermal stability, and low water uptake.