Memristive systems can provide a novel strategy to conquer the von Neumann bottleneck by evaluating information where data are located in situ. To meet the rising of artificial neural network (ANN) demand, the implementation of memristor arrays capable of performing matrix multiplication requires highly reproducible devices with low variability and high reliability. Hence, we present an Ag/CuO/SiO2/p-Si heterostructure device that exhibits both resistive switching (RS) and negative differential resistance (NDR). The memristor device was fabricated on p-Si and Indium Tin Oxide (ITO) substrates via cost-effective ultra-spray pyrolysis (USP) method. The quality of CuO nanoparticles was recognized by studying Raman spectroscopy. The topology information was obtained by scanning electron microscopy. The resistive switching and negative differential resistance were measured from current–voltage characteristics. The results were then compared with the Ag/CuO/ITO device to understand the role of native oxide. The interface barrier and traps associated with the defects in the native silicon oxide limited the current in the negative cycle. The barrier confined the filament rupture and reduced the reset variability. Reset was primarily influenced by the filament rupture and detrapping in the native oxide that facilitated smooth reset and NDR in the device. The resistive switching originated from traps in the localized states of amorphous CuO. The set process was mainly dominated by the trap-controlled space-charge-limited; this led to a transition into a Poole–Frenkel conduction. This research opens up new possibilities to improve the switching parameters and promote the application of RS along with NDR.

No abstract

No abstract

No abstract

Background: This paper provides an overview of the present advances in renewable and sustainable energy resources used for new energy demand in the world. Aiming to address, Urea, Urine resources are abundant like urea-containing wastewater, industrial urea, wastewater treatment plants, becoming an attractive option as anodic fuel for the application in urea fuel cells. And as a hydrogen-rich chemical fuel, urea can also be hydrolysis and electrolyzed to produce hydrogen for energy storage in the near future. Results: We report a novel, urea-hydrogen based compost soil microbial fuel cell (UH-CSMFC). As compost soil is a rich source of bacteria, enzymes, and organic matter, soil provided the necessary ingredients for the operation of the device. While bacteria and enzymes that hydrolysed by urea powered by the fuel cell. The compost soil was also found to exhibit partial electrocatalytic activity itself. This novel UH-CSMFC shows power density of 18.26 mW/m2. For continuous operation of the device, and cleaning of the excess of nitrogen compounds from urea fuel (urine, containing different wastewater energy resources).Conclusion: The constant state is the most desirable, where the device behaviour is entirely irreversibly, which helps to feed the device. Thus, the results of electrochemical studies show that the system is suitable for cleaning, hydrogen, power generation by consuming urea as fuel. This multifunctional device is sustainable, cheap, and eco-friendly for the environment.