The aim of this study is to analyze the effect of biodegradation on the shear strength of municipal solid waste (MSW), leachate, and biogas production. The direct shear (DS) test shows that the shear strength of waste in the initial stages is mainly depended on its composition and inter-structure. After the waste has been in a landfill for 30 days, the waste's increased biodegradation exhibited a great influence on the waste's shear strength. The increase of moisture content in the waste mass might cause a decrease of its shear strength. Tri-axial tests under consolidation-drained (CD) condition show that the shear strength of the cohesion and friction angle for degraded samples increased when the defined axial strain increased from 5 to 20 %. The cohesion varied from 35.90 to 66.42 kPa and the drained friction angle ranged between 29° and 38°. The measurements of shear strength properties are utilized to assess the slope stability of landfills.

The aim of this study is to analyse the effect of temperature on the biodegradation and settlement properties of municipal solid waste by using bioreactors. Three kinds of controlled temperature were performed during the biodegradation test; the variation of weight, leachate and biogas production were carefully monitored. The degradation test indicated that more leachate leaked out owing to the external compression and polymer hydrolysis reaction in the aerobic phase, which could lead to the decrease of biodegradation rate in the anaerobic phase. A proper temperature range in favour of enhancing biodegradation of refuse was obtained, which ranged from 22 °C to 45 °C. Finally, an empirical equation of biodegradation ratio was proposed, which incorporated the temperature effect. In the end, the validation of this proposed model is verified, and is proved to be reasonable for predicting degradation velocity in landfills.

No abstract

No abstract

No abstract