An isochoric cooling method for obtaining unprecedented tensions on liquids was used to determine the homogeneous nucleation limit for stretching of water at a variety of water densities. At densities in the range 0.55 to 0.68 gram per milliliter (g/ml), the data agree with the homogeneous nucleation temperatures measured by Skripov for superheated water at positive pressures. At densities between 0.68 and 0.93 g/ml, cavitation occurred only at negative pressures (that is, under tension). The cavitation tensions measured were in excellent agreement with those predicted by Fisher's 1948 vapor nucleation theory. A maximum tension of 140 megapascals (=1400 bars) was reached at 42 degrees C, which lies on an extrapolation of the line of isobaric density maxima. At higher densities, cavitation of droplets that survived heterogeneous nucleation failed to occur at all unless provoked, at much lower temperatures, by freezing. This observation confirms the existence of a density maximum at 42 degrees C and -140 megapascals and hence greatly strengthens the basis for Speedy's conjecture of a reentrant spinodal for water.

Strontium ranelate is a newly approved drug that can reduce the risk of vertebral fracture, which is attributed to its dual function in increasing the bone formation and decreasing the bone resorption. Strontium-containing hydroxyapatite was also demonstrated to stimulate the osteoblast activity and inhibit the osteoclast activity. However, the molecular mechanisms of strontium underlying such beneficial effects were still not fully understood. In this study, we investigated the effects of strontium on the osteogenic differentiation of human mesenchymal stem cells (MSCs) and its related mechanism; its osteogenic potential was also evaluated using a calvarial defect model in rats. We found that strontium could enhance the osteogenic differentiation of the MSCs, with upregulated extracellular matrix (ECM) gene expression and activated Wnt/b-catenin pathway. After transplanting the collagen-strontium-substituted hydroxyapatite scaffold into the bone defect region, histology and computed tomography scanning revealed that in vivo bone formation was significantly enhanced; the quantity of mature and remodeled bone substantially increased and ECM accumulated. Interestingly, strontium induced an increase of bcatenin expression in newly formed bone area. In this study, we showed for the first time that strontium could stimulate the b-catenin expression in vitro and in vivo, which might contribute to the enhanced osteogenic differentiation of MSCs and in vivo bone formation. STEM CELLS 2011;29:981-991 Disclosure of potential conflicts of interest is found at the end of this article.

No abstract

Non-isocyanate polyurethane (NIPU) is a novel kind of polyurethane prepared by reaction of cyclo-carbonates and amines without use of toxic isocyanates. NIPU has attracted increasing attention because of its improvements in porosity, water absorption, and thermal and chemical resistance over conventional polyurethanes. Their potential technological applications include chemical-resistant coating, sealants, foam, etc. In this paper, on the basis of a comprehensive survey of the currently available literature on NIPU, we summarize recent progress in NIPU, and mainly discuss the syntheses of cyclo-carbonates oligomers, the reaction mechanism, and the preparation and application of different kinds of NIPU.

Design of tough hydrogels has made great progress in the past two decades. However, the synthetic tough gels are usually much softer than some biotissues (e.g., skins with modulus up to 100 MPa). Here we report a new class of ultrastiff and tough supramolecular hydrogels facilely prepared by copolymerization of methacrylic acid and methacrylamide. The gels with water content of approximately 50–70 wt % possessed remarkable mechanical properties, with Young’s modulus of 2.3–217.3 MPa, tensile breaking stress of 1.2–8.3 MPa, breaking strain of 200–620%, and tearing fracture energy of 2.9–23.5 kJ/m2, superior to most existing hydrogels, especially in terms of modulus. Typical yielding and crazing were observed in the gel under tensile loading, indicating the forced elastic deformation of these hydrogels in a glassy state, as confirmed by dynamic mechanical analysis. The ultrahigh stiffness was attributed to the dense cross-linking and reduced segmental mobility caused by the robust intra- and interchain hydrogen bonds. Because of the dynamic nature of noncovalent bonds, these supramolecular gels also showed rate-dependent mechanical performances along with good shape memory and recyclability. This strategy should be applicable for other systems toward robust mechanical properties, versatile functionalities, and promising applications of hydrogel materials as structural elements.