Ti 3 C 2 T x MXene with an organ-like structure was synthesized from Ti 3 AlC 2 (MAX phase) through the typical hydrofluoric (HF) acid etching method. Ti 3 C 2 T x MXene was further alkaline-treated with a sodium hydroxide solution to obtain alkalized Ti 3 C 2 T x . Room-temperature planar-type gas-and humidity-sensing devices were also fabricated by utilizing Ti 3 C 2 T x MXene and alkalized Ti 3 C 2 T x sensing material based on the dip coating method, respectively. The intercalation of the alkali metal ion (Na + ) and the increase of the surface terminal oxygen−fluorine ratio ([O]/[F]) in Ti 3 C 2 T x can effectively improve humidity-and gas-sensing properties at room temperature. The developed alkalized Ti 3 C 2 T x sensor exhibited excellent humidity-sensing characteristics (approximately 60 times response signal change) in the relative humidity (RH) with a range of 11−95% and considerable NH 3 sensing performance (28.87% response value to 100 ppm of NH 3 ) at room temperature. The improvement of NH 3 and humidity-sensing properties indicated that alkalized Ti 3 C 2 T x has great potential in chemical sensors, especially in NH 3 and humidity sensors. KEYWORDS: MXene, organ-like structure, alkalized Ti 3 C 2 T x , NH 3 and humidity sensing, room temperature

No abstract

Lithium metal with high theoretical capacity (3860 mAh/g) and low operational voltage (-3.04 V vs. standard hydrogen electrode) reflects to be one of the most high energy density anodes for energy storage devices. While, its high chemical activity to continuously react with electrolytes causing low coulombic efficiency and formation of lithium dendrites leading safety concern limits practical applications. To conquer these challenges, amorphous Li 3 PO 4 thin films with thickness of 0-200 nm are directly coated on the surface of Li metal foil via magnetron sputtering. The as-prepared Li 3 PO 4 has almost insulated property with electronic conductivity of 1.4×10 -10 S/cm and ionic conductivity of 2.8×10 -8 S/cm. The conformal coating layer Li 3 PO 4 can successfully suppress the lithium dendrites growth and improve its life span. The remarkable improvements of the Li 3 PO 4 -coated Li electrodes are mainly attributed to high chemical stability as well as amorphous nature of Li 3 PO 4 , which leads layer-by-layer growth Li film rather than islands form dendrites.