The proposed key to producing a good shape memory effect in FeMnSi alloys is to reduce or even prevent the collisions between martensite bands. A method for realizing this is to make stress‐induced martensite bands form in a domain‐specific manner. We developed a novel training‐free cast Fe18Mn5.5Si9.5Cr4Ni alloy with residual lathy delta ferrite based on this idea. The recovery strain reached 6.4% only after annealing the cast Fe18Mn5.5Si9.5Cr4Ni alloy. Microstructure observations indicated that the lathy delta ferrite made the stress‐induced martensite form in a domain‐specific manner by first subdividing grains into smaller domains. We hypothesize that through adjusting alloy compositions, solidification parameters, and heat treatment technique, the shape recovery of cast FeMnSi alloys can be further improved. Such a finding will provide a novel method for developing training‐free FeMnSi shape memory alloys.

No abstract

The effects of thermally induced cyclic g $ e transformation on microstructures and shape memory effect (SME) are investigated in a quenched Fe14Mn5.5Si8.0Cr5.0Ni alloy. The results show that the annealing at 773 K remarkably improves the SME in the quenched alloy. One thermal cycling between 290 and 773 K remarkably increases the SME, but the further thermal cycling hardly improves the SME. The reason is that the amount of thermal e martensite remarkably reduces after annealing at 773 K, but it hardly changes with the further increase of thermal cycling between 290 and 773 K. The pre-existing thermal e martensite not only prevents the occurrence of stress-induced e martensitic transformation but also promotes the formation of a 0 martensite. ADVANCED ENGINEERING MATERIALS 2013, 15, No. 8

No abstract