Mechanical flexibility of electronic devices has attracted much attention from research due to the great demand in practical applications and rich commercial value. Integration of functional oxide materials in flexible polymer materials has proven an effective way to achieve flexibility of functional electronic devices. However, the chemical and mechanical incompatibilities at the interfaces of dissimilar materials make it still a big challenge to synthesize high-quality single-crystalline oxide thin film directly on flexible polymer substrates. This study reports an improved method that is employed to successfully transfer a centimeter-scaled single-crystalline LiFe O thin film on polyimide substrate. Structural characterizations show that the transferred films have essentially no difference in comparison with the as-grown films with respect to the microstructure. In particular, the transferred LiFe O films exhibit excellent magnetic properties under various mechanical bending statuses and show excellent fatigue properties during the bending cycle tests. These results demonstrate that the improved transfer method provides an effective way to compose single-crystalline functional oxide thin films onto flexible substrates for applications in flexible and wearable electronics.

Owning to the unique optical and electronic properties, organic−inorganic hybrid perovskites have made impressive progress in photodetection applications. However, achieving ultrabroadband detection over the ultraviolet (UV) to terahertz (THz) range remains a major challenge for perovskite photodetectors. Here, we report an ultrabroadband (UV−THz) dual-mechanism photodetector based on CH 3 NH 3 PbI 3 films. The photoresponse of the PD in the UV−visible (vis) and near-infrared (NIR)−THz bands is mainly caused by the photoconductive (PC) effect and bolometric effect, respectively. High responsivities ranging from 10 5 to 10 2 mA W −1 are acquired within UV−THz bands under 1 V bias voltage at room temperature. Moreover, the device also shows fast rise and decay times of 76 and 126 ns under 1064 nm laser illumination, respectively. This work provides insight into the thermoelectric characteristics of perovskite and offers a new way to realize ultrabroadband photodetectors notably for THz detector at room temperature.

Organic–inorganic halide perovskite with low thermal conductivity, high Seebeck coefficient and high carrier mobility are promising thermoelectric materials for near infrared (NIR) and terahertz (THz) photodetector (PD). Here, we report...

Highly sensitive broadband photodetection is of critical importance for many applications. However, it is a great challenge to realize broadband photodetection by using a single device. Here we report photodetectors (PDs) based on three-dimensional (3D) graphene foam (GF) photodiodes with asymmetric electrodes, which show an ultra-broadband photoresponse from ultraviolet to microwave for wavelengths ranging from 10 2 to 10 6    nm . Moreover, the devices exhibit a high photoresponsivity of 10 3    A   · W − 1 , short response time of 43 ms, and 3 dB bandwidth of 80 Hz. The high performance of the devices can be attributed to the photothermoelectric (PTE, also known as the Seebeck) effect in 3D GF photodiodes. The excellent optical, thermal, and electrical properties of 3D GFs offer a superior basis for the fabrication of PTE-based PDs. This work paves the way to realize ultra-broadband and high-sensitivity PDs operated at room temperature.

Self-powered and flexible ultrabroadband photodetectors (PDs) are desirable in a wide range of applications. The current PDs based on the photothermoelectric (PTE) effect have realized broadband photodetection. However, most of them express low photoresponse and lack of flexibility. In this work, high-performance, self-powered, and flexible PTE PDs based on laser-scribed reduced graphene oxide ( LSG ) / CsPbBr 3 are developed. The comparison experiment with LSG PD and fundamental electric properties show that the LSG / CsPbBr 3 device exhibits enhanced ultrabroadband photodetection performance covering ultraviolet to terahertz range with high photoresponsivity of 100 mA/W for 405 nm and 10 mA/W for 118 μm at zero bias voltage, respectively. A response time of 18 ms and flexible experiment are also acquired at room temperature. Moreover, the PTE effect is fully discussed in the LSG / CsPbBr 3 device. This work demonstrates that LSG / CsPbBr 3 is a promising candidate for the construction of high-performance, flexible, and self-powered ultrabroadband PDs at room temperature.