OATAO is an open access repository that collects the work of some Toulouse researchers and makes it freely available over the web where possible.

Among the methods to create superhydrophobic surfaces by wet chemistry, one of the strategies consists in coating the substrate with a hydrophobic polymer with specific morphology. Such elaborated surfaces are largely developed and can present complex architectures but are generally fragile. Ceramic-based coatings show better durability. In this work, a new route associating inorganic and polymeric parts is used. Surfaces with superhydrophobic properties are prepared with a mixture of zinc oxide (ZnO) particles in a hybrid organic inorganic matrix prepared via sol-gel route. ZnO particles were synthesized by the inorganic polycondensation route and exhibit an appropriate micro-/nanostructure for superhydrophobicity. Sol-gel matrix is obtained by the alkoxide route with aluminum-tri-secbutoxide (ASB) and (3-glycidoxypropyl)trimethoxysilane (GPTMS). A step of octadecylphosphonic acid (ODP) functionalization on ZnO particles and on film surfaces was employed to considerably improve hydrophobic properties. This new route enables to obtain superhydrophobic coatings that exhibit water contact angles superior to 150°. These coatings show a homogeneous and smooth coverage on aluminum alloy substrate. Results attest the significance of the synergy for superhydrophobic coatings: a micro-/nanostructured surface and an intrinsic hydrophobic property of the material. The durability of the coatings has also been demonstrated with only a slight decrease in hydrophobicity after erosion.