Global investment in biomedical research has grown significantly over the last decades, reaching approximately a quarter of a trillion US dollars in 2010. However, not all of this investment is distributed evenly by gender. It follows, arguably, that scarce research resources may not be optimally invested (by either not supporting the best science or by failing to investigate topics that benefit women and men equitably). Women across the world tend to be significantly underrepresented in research both as researchers and research participants, receive less research funding, and appear less frequently than men as authors on research publications. There is also some evidence that women are relatively disadvantaged as the beneficiaries of research, in terms of its health, societal and economic impacts. Historical gender biases may have created a path dependency that means that the research system and the impacts of research are biased towards male researchers and male beneficiaries, making it inherently difficult (though not impossible) to eliminate gender bias. In this commentary, we – a group of scholars and practitioners from Africa, America, Asia and Europe – argue that gender-sensitive research impact assessment could become a force for good in moving science policy and practice towards gender equity. Research impact assessment is the multidisciplinary field of scientific inquiry that examines the research process to maximise scientific, societal and economic returns on investment in research. It encompasses many theoretical and methodological approaches that can be used to investigate gender bias and recommend actions for change to maximise research impact. We offer a set of recommendations to research funders, research institutions and research evaluators who conduct impact assessment on how to include and strengthen analysis of gender equity in research impact assessment and issue a global call for action.
Wireless sensor nodes (WSNs) and embedded microsystems have recently gained tremendous traction from researchers due to their vast sensing and monitoring applications in various fields including healthcare, academic, finance, environment, military, agriculture, retail, and consumer electronics. An essential requirement for the sustainable operation of WSN is the presence of an uninterrupted power supply; which is currently obtained from electrochemical batteries that suffer from limited life cycles and are associated with serious environmental hazards. An alternative to replacing batteries of WSNs; either the direct replacement or to facilitate battery regular recharging, is by looking into energy harvesting for its sustainable drive. Energy harvesting is a technique by which ambient energy can be converted into useful electricity, particularly for low-power WSNs and consumer electronics. In particular, vibration-based energy harvesting has been a key focus area, due to the abundant availability of vibration-based energy sources that can be easily harvested. In vibration-based energy harvesters (VEHs), different optimization techniques and design considerations are taken in order to broaden the operation frequency range through multi-resonant states, increase multi-degree-of-freedom, provide nonlinear characteristics, and implement the hybrid conversion. This comprehensive review summarizes recent developments in VEHs with a focus on piezoelectric, electromagnetic, and hybrid piezoelectric-electromagnetic energy harvesters. Various vibration and motion-induced energy harvesting prototypes have been reviewed and discussed in detail with respect to device architecture, conversion mechanism, performance parameters, and implementation. Overall sizes of most of the reported piezoelectric energy harvesters are in the millimeter to centimeter scales, with resonant frequencies in the range of 2-13 900 Hz. Maximum energy conversion for electromagnetic energy harvesters can potentially reach up to 778.01 μW/cm 3. The power produced by the reported hybrid energy harvesters (HEHs) is in the range of 35.43-4900 μW. Due to the combined piezoelectric-electromagnetic energy conversion in HEHs, these systems are capable of producing the highest power densities.
Harvesting biomechanical energy is a viable solution to sustainably powering wearable electronics for continuous health monitoring, remote sensing, and motion tracking. A hybrid insole energy harvester (HIEH), capable of harvesting energy from low-frequency walking step motion, to supply power to wearable sensors, has been reported in this paper. The multimodal and multi-degrees-of-freedom low frequency walking energy harvester has a lightweight of 33.2 g and occupies a small volume of 44.1 cm3. Experimentally, the HIEH exhibits six resonant frequencies, corresponding to the resonances of the intermediate square spiral planar spring at 9.7, 41 Hz, 50 Hz, and 55 Hz, the Polyvinylidene fluoride (PVDF) beam-I at 16.5 Hz and PVDF beam-II at 25 Hz. The upper and lower electromagnetic (EM) generators are capable of delivering peak powers of 58 µW and 51 µW under 0.6 g, by EM induction at 9.7 Hz, across optimum load resistances of 13.5 Ω and 16.5 Ω, respectively. Moreover, PVDF-I and PVDF-II generate root mean square (RMS) voltages of 3.34 V and 3.83 V across 9 MΩ load resistance, under 0.6 g base acceleration. As compared to individual harvesting units, the hybrid harvester performed much better, generated about 7 V open-circuit voltage and charged a 100 µF capacitor up to 2.9 V using a hand movement for about eight minutes, which is 30% more voltage than the standalone piezoelectric unit in the same amount of time. The designed HIEH can be a potential mobile source to sustainably power wearable electronics and wireless body sensors.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.