Scanning probe microscopy provides a unique window into the morphology, mechanics, and structure of proteins and their complexes on the nanoscale. Such measurements require, however, deposition of samples onto substrates. This process can affect conformations and assembly states of the molecular species under investigation and can bias the molecular populations observed in heterogeneous samples through differential adsorption. Here, we show that these limitations can be overcome with a single-step microfluidic spray deposition platform. This method transfers biological solutions to substrates as microdroplets with subpicoliter volume, drying in milliseconds, a timescale that is shorter than typical diffusion times of proteins on liquid–solid interfaces, thus avoiding surface mass transport and change to the assembly state. Finally, the single-step deposition ensures the attachment of the full molecular content of the sample to the substrate, allowing quantitative measurements of different molecular populations within heterogeneous systems, including protein aggregates.

Nanofluidic devices have great potential for applications in areas ranging from renewable energy to human health. A crucial requirement for the successful operation of nanofluidic devices is the ability to interface them in a scalable manner with the outside world. Here, we demonstrate a hybrid two photon nanolithography approach interfaced with conventional mask whole-wafer UV-photolithography to generate master wafers for the fabrication of integrated micro and nanofluidic devices. Using this approach we demonstrate the fabrication of molds from SU-8 photoresist with nanofluidic features down to 230 nm lateral width and channel heights from micron to sub-100 nm. Scanning electron microscopy and atomic force microscopy were used to characterize the printing capabilities of the system and show the integration of nanofluidic channels into an existing microfluidic chip design. The functionality of the devices was demonstrated through super-resolution microscopy, allowing the observation of features below the diffraction limit of light produced using our approach. Single molecule localization of diffusing dye molecules verified the successful imprint of nanochannels and the spatial confinement of molecules to 200 nm across the nanochannel molded from the master wafer. This approach integrates readily with current microfluidic fabrication methods and allows the combination of microfluidic devices with locally two-photon-written nano-sized functionalities, enabling rapid nanofluidic device fabrication and enhancement of existing microfluidic device architectures with nanofluidic features.

Optical detection has become a convenient and scalable approach to read out information from microfluidic systems. For the study of many key biomolecules, however, including peptides and proteins, which have low fluorescence emission efficiencies at visible wavelengths, this approach typically requires labeling of the species of interest with extrinsic fluorophores to enhance the optical signal obtained - a process which can be time-consuming, requires purification steps, and has the propensity to perturb the behavior of the systems under study due to interactions between the labels and the analyte molecules. As such, the exploitation of the intrinsic fluorescence of protein molecules in the UV range of the electromagnetic spectrum is an attractive path to allow the study of unlabeled proteins. However, direct visualization using 280 nm excitation in microfluidic devices has to date commonly required the use of coherent sources with frequency multipliers and devices fabricated out of materials that are incompatible with soft lithography techniques. Here, we have developed a simple, robust, and cost-effective 280 nm LED platform that allows real-time visualization of intrinsic fluorescence from both unlabeled proteins and protein complexes in polydimethylsiloxane microfluidic channels fabricated through soft lithography. Using this platform, we demonstrate intrinsic fluorescence visualization of proteins at nanomolar concentrations on chip and combine visualization with micron-scale diffusional sizing to measure the hydrodynamic radii of individual proteins and protein complexes under their native conditions in solution in a label-free manner.

Microcapsules are a key class of microscale materials with applications in areas ranging from personal care to biomedicine, and with increasing potential to act as extracellular matrix (ECM) models of hollow organs or tissues. Such capsules are conventionally generated from non-ECM materials including synthetic polymers. Here, we fabricated robust microcapsules with controllable shell thickness from physically-and enzymatically-crosslinked gelatin and achieved a core-shell architecture by exploiting a liquid-liquid phase separated aqueous dispersed phase system in a one-step microfluidic process. Microfluidic mechanical testing revealed that the mechanical robustness of thicker-shell capsules could be controlled through modulation of the shell thickness. Furthermore, the microcapsules demonstrated environmentally-responsive deformation, including buckling by osmosis and external mechanical forces. Finally, a sequential release of cargo species was obtained through the degradation of the capsules. Stability measurements showed the capsules were stable at 37 • C for more than two weeks. These smart capsules are promising models of hollow biostructures, microscale drug carriers, and building blocks or compartments for active soft materials and robots.

DNA circuits form the basis of programmable molecular systems capable of signal transduction and algorithmic computation. Some classes of molecular programmes, such as catalysed hairpin assembly, enable isothermal, enzyme-free signal amplification. However, current detection limits in DNA amplification circuits are modest, as sensitivity is inhibited by signal leakage resulting from noncatalysed background reactions inherent to the non-covalent system. Here, we overcome this challenge by optimising catalysed hairpin assembly for single-molecule sensing in a digital droplet assay. Furthermore, we demonstrate digital reporting of DNA computation at the single-molecule level by employing ddCHA as a signal transducer for simple DNA logic gates. By facilitating signal transduction of molecular computation at pM concentration, our approach can improve processing density by a factor of 10 4 relative to conventional DNA logic gates. More broadly, we believe that digital molecular computing will broaden the scope and efficacy of isothermal amplification circuits within DNA computing, biosensing and signal amplification in general.