Natural rubber (polymer designation cis-1-4 polyisoprene, is obtained from the sap ("latex") of several rubber-yielding plants (e.g.,HeveaBrasiliensisandPartheniaargentatum) by coagulation with chemicals, drying, electrical coagulation, and other processes. Foamy or sponge structure of natural rubber (NR) is very useful in aerospace and as auxetic materials (exhibiting negative poisons ratio) for use in application of homeland security.The main aim of this research to estimate the influence of carbon black on mechanical properties, curing and viscosity variation behaviors of the natural rubber based composites. Different amounts of carbon black were used along with other fillers. The influence of carbon black on curing behavior and mechanicalproperties of natural rubber foams was investigated at different feedingratios of the carbon black. The physical properties of the foamed NRs were then measured as a function of carbon blacks content. The mechanical properties of the foamed NRs such as tensile strength,strength at break and modulus,were gradually increased with increasingcarbon black content whereas elongation decreasedat break.

No abstract

No abstract

Ablative composites are heat shielding, protective materials that are being used in aerospace industry to protect inner hardware and sensitive devices. The aero dynamic vehicles have to face high stresses, ultra high temperature and adverse conditions of air friction. It is required to develop the materials with light weight and high modulus. EPDM, being heat and ozone attack resistant is the best candidate for the preparation of ablative composites by introducing different heat sinks such as silica, glass fiber, carbon fiber, asbestos, carbon and their combinations have been studied in this work. The prepared materials were tested and it was found that visco elastic behavior of the composites affected by the addition of reinforcing filler (carbon, silica), semi-reinforcing filler (carbon fiber, glass fiber) and non-reinforcing filler (asbestos powder). Mechanical properties tested at different rates, revealed the improvement in tensile strength and % elongation in case of reinforcing and semi-reinforcing fillers but showed adverse effect in case of non-reinforcing fillers. Rheological investigations of these novel composites shows that moony viscosity of the materials containing glass fiber, carbon fiber, silica decreases in the order glass fiber > carbon fiber > silica.