No-insulation (NI) REBCO magnets have many advantages. They are self-protecting, therefore do not need quench detection and protection which can be very challenging in a high Tc superconducting magnet. Moreover, by removing insulation and allowing thinner copper stabilizer, NI REBCO magnets have significantly higher engineering current density and higher mechanical strength. On the other hand, NI REBCO magnets have drawbacks of long magnet charging time and high field-ramp-loss. In principle, these drawbacks can be mitigated by managing the turn-to-turn contact resistivity (Rc). Evidently the first step toward managing Rc is to establish a reliable method of accurate Rc measurement. In this paper, we present experimental Rc measurements of REBCO tapes as a function of mechanical load up to 144 MPa and load cycles up to 14 times. We found that Rc is in the range of 26-100 µΩ -cm 2 ; it decreases with increasing pressure, and gradually increases with number of load cycles. The results are discussed in the framework of Holm's electric contact theory.

Structure and magnetic properties of multi-walled carbon nanotubes modified with iron Low Temp.

No abstract