A bottom-up, multiscale modeling approach is presented to carry out high-fidelity virtual mechanical tests of composite materials and structures. The strategy begins with the in situ measurement of the matrix and interface mechanical properties at the nanometer-micrometer range to build up a ladder of the numerical simulations, which take into account the relevant deformation and failure mechanisms at different length scales relevant to individual plies, laminates and components. The main features of each simulation step and the information transferred between length scales are described in detail as well as the current limitations and the areas for further development. Finally, the roadmap for the extension of the current strategy to include functional properties and processing into the simulation scheme is delineated.

ABSTRACT3D woven composites reinforced with either S2 glass, carbon or a hybrid combination of both and containing either polyethylene or carbon z-yarns were tested under low-velocity impact. Different impact energies (in the range of 21-316 J) were used and the mechanical response (in terms of the impact strength and energy dissipated) was compared with that measured in high-performance, albeit standard, 2D laminates. It was found that the impact strength in both 2D and 3D materials was mainly dependent on the in-plane fiber fracture. Conversely, the energy absorption capability was primarily influenced by the presence of z-yarns, having the 3D composites dissipated over twice the energy than the 2D laminates, irrespective of their individual characteristics (fiber type, compaction degree, porosity, etc.). X-ray microtomography revealed that this improvement was due to the z-yarns, which delayed delamination and maintained the structural integrity of the laminate, promoting energy dissipation by tow splitting, intensive fiber breakage under the tup and formation of a plug by out-of-plane shear.

No abstract

No abstract