A number of critical remarks related to the application of fractional derivatives in electrical circuit theory have been presented in this paper. Few cases have been pointed out that refer to observed in selected publications violations of dimensional uniformity of physical equation rules as well as to a potential impact on the Maxwell equations.

No abstract

This article presents the results of investigations on HR6W alloy and Sanicro 25 steel and the dissimilar welded joint made of them. The characteristic images of microstructure of the investigated materials in the as-received condition and following the creep test, observed with a scanning electron microscope (SEM), are shown. The X-ray analysis of phase composition of the existing precipitates was carried out. The method for evaluation of creep strength based on abridged creep tests carried out at a temperature higher than the design one is presented. The obtained results do not deviate from the values of creep strength determined in longterm creep tests. The maximum difference in creep strength of the investigated materials is ±20%, which is in compliance with the acceptable scatter band. The methodology presented can be used for verification of creep strength (life time) of the material of finished components to be operated under creep conditions.

W!brdne ?JgJdni€ aiJ p'zePłyau llvor/yT. B lornie llry\(o$el ' hddńg dllfuev ojtred Ń ńe h' ś dłkbi oG ł ńftl qi p 'j!'oŃNlnDduP]liqlhifu'ddh! tł F&P'w!h !!{!Ąvh !i!b|b {jqi