No abstract

No abstract

No abstract

Influence of compaction and degassing on the properties of submicron WCCo produced by the PPS method. The present study is concerned with the effect of the parameters of the degassing operation (temperature, load and heating rate) conducted at the initial stage of the Pulse Plasma Sintering (PPS) process and the sintering temperature at the final stage of the process, on the properties and microstructure of WCCo with a 6wt% cobalt content sintered by this method. The results of the study have shown that when the heating rate is too high, the material obtained is porous. In most experiments, the sintering temperature of 1050°C appeared to be too low to obtain WCCo composites with density close to the theoretical value (GT). Sintering at the temperature increased to 1070°C yielded sinters with density above 99%GT, with hardness of about 1900 HV30 and fracture toughness KIC=9.3 MNm-3/2.

This paper presents the results of studies concerning the production and characterization of Al-SiC/W and Cu-SiC/W composite materials with a 30% volume fraction of reinforcing phase particles as well as the influence of corrosion and thermal shocks on the properties of selected metal matrix composites. Spark plasma sintering method (SPS) was applied for the purpose of producing these materials. In order to avoid the decomposition of SiC surface, SiC powder was coated with a thin tungsten layer using plasma vapour deposition (PVD) method. The obtained results were analysed by the effect of the corrosion and thermal shocks on materials density, hardness, bending strength, tribological and thermal properties. Qualitative X-ray analysis and observation of microstructure of sample surfaces after corrosion tests and thermal shocks were also conducted. The use of PVD technique allows us to obtain an evenly distributed layer of titanium with a constant thickness of 1.5 µm. It was found that adverse environmental conditions and increased temperature result in a change in the material behaviour in wear tests.