Exponential interest in the field of covalent organic frameworks (COFs) stems from the direct correlation between their modular design principle and various interesting properties. However, existing synthetic approaches to realize this goal mainly result in insoluble and unprocessable powders, which severely restrict their widespread applicability. Therefore, developing a methodology for easy fabrication of these materials remains an alluring goal and a much desired objective. Herein, we have demonstrated a bottom-up interfacial crystallization strategy to fabricate these microcrystalline powders as large-scale thin films under ambient conditions. This unique design principle exploits liquid-liquid interface as a platform, allowing simultaneous control over crystallization and morphology of the framework structure. The thin films are grown without any support in free-standing form and can be transferred onto any desirable substrate. The porous (with Tp-Bpy showing highest S of 1 151 m g) and crystalline thin films, having high chemical as well as thermal stability, also hold the merit to tune the thickness as low as sub-100 nm. These nanostructured thin COF films demonstrate remarkable solvent-permeance and solute-rejection performance. A prominent instance is the Tp-Bpy thin film, which displays an unprecedented acetonitrile permeance of 339 L m h bar.

Self-standing, flexible, continuous, and crack-free covalent-organic-framework membranes (COMs) are fabricated via a simple, scalable, and highly cost-effective methodology. The COMs show long-term durability, recyclability, and retain their structural integrity in water, organic solvents, and mineral acids. COMs are successfully used in challenging separation applications and recovery of valuable active pharmaceutical ingredients from organic solvents.

Covalent organic nanosheets (CONs) are a new class of porous thin two-dimensional (2D) nanostructures that can be easily designed and functionalized and could be useful for separation applications. Poor dispersion, layer restacking, and difficult postsynthetic modifications are the major hurdles that need to be overcome to fabricate scalable CON thin films. Herein, we present a unique approach for the chemical exfoliation of an anthracene-based covalent organic framework (COF) to N-hexylmaleimide-functionalized CONs, to yield centimeter-sized free-standing thin films through layer-by-layer CON assembly at the air-water interface. The thin-layer fabrication technique presented here is simple, scalable, and does not require any surfactants or stabilizing agents.

No abstract

The free surface of a thin soft polymer film is often found to become unstable and self-organizes into various meso-scale structures. In this article we classify the instability of a thin polymer film into three broad categories, which are: category 1: instability of an ultra-thin (<100 nm) viscous film engendered by amplification of thermally excited surface capillary waves due to interfacial dispersive van der Waals forces; category 2: instability arising from the attractive inter-surface interactions between the free surface of a soft film exhibiting room temperature elasticity and another rigid surface in its contact proximity; and category 3: instability caused by an externally applied field such as an electric field or a thermal gradient, observed in both viscous and elastic films. We review the salient features of each instability class and highlight how characteristic length scales, feature morphologies, evolution pathways, etc. depend on initial properties such as film thickness, visco-elasticity (rheology), residual stress, and film preparation conditions. We emphasize various possible strategies for aligning and ordering of the otherwise isotropic structures by combining the essential concepts of bottom-up and top-down approaches. A perspective, including a possible future direction of research, novelty and limitations of the methods, particularly in comparison to the existing patterning techniques, is also presented for each setting.