Ultra-high intensity lasers in use are connected with ionizing radiation sources that raise a real concern in relation to installations, personnel, population and environment protection. The shielding of target areas in these facilities has to be evaluated from the conceptual stage of the building design. The sizing of the protective concrete walls was determined using computer codes such as Fluka. For the experiments to be carried out in the facility of the Center for Advanced Laser Technologies (CETAL), both proton beams with the energy of 100 MeV and electron beams with 300 MeV energy were considered to calculate the dimensions of structural shielding and to establish technical solutions fulfilling the radiation protection constraints imposed by the National Commission for Nuclear Activities Control.

No abstract

No abstract

No abstract

In all the future applications of the laser accelerated beams (as generated in the ELI and CETAL projects) in-beam dose measurements will be needed. The gold standard in dose measurement remain the ion chambers, but for the beams we intend to measure they do present some limitations given be the large number of corrections to be applied in order to calculate a correct dose from the measured charge. The ELIDOSE project is addressing these problems by proposing an array detector that would allow the simultaneous measurement of the recombination and polarity corrections, as well as of the dose – the QUADRO-fm (Quad Detector for RecOmbination factor measurement). The prototype detector consists of 4 identical ion chambers mounted together in a PMMA frame and the project analyses its response to various charged particle beams and the reciprocal influences of the chambers on each other. This reciprocal influences of the four chambers have been studied in well characterised therapy electron beams and conclusions regarding further developments have been drawn. The paper presents the characterisation of the proton and electron beams used in the experiment, as well as the dose measurements in the 5 MeV electron beams generated by a Siemens radiotherapy LINAC and the comparison with the FLUKA based simulations.