The effects of high-pressure (33, 400 and 700 MPa for 3 min at 24 and 55°C) and irradiation (2 and 5 kGy) pre-treatments on hydration behavior of navy beans were studied by soaking the treated beans in water (1:2, w/w) at 24 and 55°C. Beans hydrated at 55°C and allowed to cool by natural convection served as the control. Treating beans under moderate pressure (33 MPa) resulted in high initial moisture uptake (0.59 to 1.02 kg/kg dry mass) and reduced loss of soluble materials. The final moisture content after three hours of soaking was the highest in irradiated beans (5 kGy) followed by HPP (33 MPa; 3 min; 55°C). Within the experimental range of the study, Pelegs model was found to satisfactorily describe the rate of water absorption of navy beans. Peleg's constant K1 had an inverse correlation with soaking temperature whereas K2 increased with increases in temperature and pressure.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.