Zeolite types LTZ and LSX were synthesized from bauxite and kaolin in Ghana and characterized by x-ray diffraction, scanning electron microscopy, energy dispersive x-ray spectroscopy and Fouries transformed infrared spectroscopy. The zeolites were then applied to used lubricant oil and parameters lubricant engine oil were measured and compared to those of fresh ones. Parameters such as flashpoint, viscosity index, pour point, sulfur content, heavy metals, specific gravity, refractive index and carbon residue were analyzed. The results obtained showed that zeolite types A and X successfully removed heavy metals, particularly lead, copper and iron that were in the spent oil. A removal efficiency of 23.40 % Fe, 96.76 % Zn, 19.05 % Cu and 12 % Cr were obtained for Zeolite A with a yield of 62 % whilst 32.81 % Fe, 39.00 %, Zn, 47.61 %, Cu and 24 % Cr were obtained for zeolite LSX with a yield of 67 %. The viscosity index of the virgin, zeolite LTA treated and zeolite LSX treated oils were 115, 121 and 115 respectively. These results showed that used engine oils recovered using glacial acetic acid and zeolites A and LSX can be reused.

Zeolites A was synthesized from alternate sources such as filtrate from synthesized zeolite LSX and aluminate solution extracted from bauxite which produced a very good yield. The synthesized zeolite type was characterized by X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDX). The synthesized product showed a high degree of crystallinity from the XRD results. When applied to a spent lubricating oil, the efficiency in removing the heavy metals was: 23.4% Fe, 96.8% Zn, 19.0% Cu, and 12.0% Cr. The saturates in the regenerated oil were 80% carbon, 4% residue, and 16% aromatics as compared to that of a commercial virgin oil that contained 84% saturates, 3% carbon residue, and 13% aromatics. This indicated that the spent oil can be reused.

Background. Afzelia africana is a plant species with reported numerous medicinal potentials and secondary metabolites. Various parts of the plant have been applied for the treatment of hernia, rheumatism, pain, lumbago, malaria, etc. The study seeks to evaluate the phytochemical constituents, antiplasmodial, and ESI-MS scan of bioassay-guided fractions from the methanol extract of the bark of the plant. Aims. The main aim of the study was to carry out bioassay-guided fractionation of the crude methanol extract of Afzelia africana in order to isolate fractions and to evaluate their antiplasmodial activities and ESI-MS fingerprints. Methods. The methods employed include column chromatographic fractionation, phytochemical screening, antiplasmodial activity (malaria SYBER green assay (MSF)), and ESI-MS profile (full ESI-MS scan). Results. The column chromatographic fractionation and phytochemical screening of the plant led to the separation of the following four fractions: 1 (flavonoids, phenolics, glycosides, terpenoids, and steroids), 2 (alkaloids, anthraquinones, flavonoids, phenolics, glycosides, terpenoids, and steroids), 3 (anthraquinones, flavonoids, phenolics, glycosides, terpenoids, and steroids), and 4 (alkaloids, flavonoids, phenolics, glycosides, terpenoids, and steroids). The antiplasmodial activities of the fractions were tested against the 3D7 strain of Plasmodium falciparum with reported stronger activities for 1 (IC50: 0.097 ± 0.034 μg/mL) and 3 (IC50: 1.43 ± 0.072 μg/mL), and weaker activities for 2 (IC50: >100 μg/mL) and 4 (IC50: 37.09 ± 6.14 μg/mL). The full ESI-MS fingerprint of fractions 1, 2, 3, and 4 revealed the presence of 14, 24, 34, and 37 major molecular ions or compounds in each fraction, respectively.

No abstract

Polystyrene is an aromatic hydrocarbon plastic material with applications in the packaging, food, and construction industries. As a packaging material, it protects items against shocks and acts as an insulator in the construction of buildings and food preservation. The polystyrene bowl for food packaging has become a convention in the food and pastries industry in Ghana due to its clean, lightweight, and insulation properties. However, the corresponding waste litters its environment, chocks gutters, and does not decompose. For this reason, we explored the hot melt recycling technique to convert the PS wastes into valuable plastic plates that finds application in the artifact and souvenir industry. The incorporation of a 20% v/w lauric fatty acid (LFA) into the material matrix blocked micro holes in the finished product and induced a smooth surface. Characterizations included experiments such as Fourier Transform-Infra Red spectroscopy, melting point determination, tensile testing, and scanning electron microscopy (SEM). Generated data displayed the absence of a chemical bond between the PS molecules and the LFA additive. However, the methyl chains of the PS molecules were miscible with the saturated dodecyl chains of the LFA additive. Hence, the LFA additive was held in place by weak intermolecular forces between its chains and that of the PS molecules. The measured melting point of the recycled plastic with LFA content (rPS20) fell between 84-142 °C. Mechanically, the tensile strength dropped with the addition of LFA. The LFA induced a smooth surface morphology finishing in rPS20.