The COVID-19 pandemic has highlighted the need of eco-friendly and locally or distributed manufacturing of diagnostic and safety products. Here, we characterized five handmade papers for their potential application to make paper analytical device (PADs). The handmade papers were made from locally available plant fiber using eco-friendly method. Thickness, grammage, and apparent density of the paper samples ranged from 198 μm to 314 μm, 49 g/m2 to 117.8 g/m2, and 0.23 to 0.39 g/cm3, respectively. Moisture content, water filtration and wicking speed ranged from 5.2% to 7.1%, 35.7 to 156.7, and 0.062 to 0.124 mms-1, respectively. Further, water contact angle and porosity ranged from 76˚ to 112˚ and 79% to 83%, respectively. The best paper sample one was chosen to fabricate PADs which were used for the determination of metformin. The metformin assay on PADs followed linear range from 0.0625 to 0.5 mg/mL. The assay had limit of detection and limit of quantitation of 0.05 mg/mL and 0.18 mg/mL respectively. The new method was used to test metformin samples (n=20) collected from local pharmacies. The average amount of metformin concentration in samples was 465.6 ± 15.1mg/tablet. Three samples did not meet the regulatory standards. When compared with spectrophotometric method, PADs assay correctly predicted 18 out of 20 samples. The PADs assay on handmade paper may provide a low-cost and easy-to-use system to screening the quality of drugs and other point-of-need applications.