No abstract

An increasing number of components in automotive structures are today made from advanced high strength steel (AHSS). Since AHSS demonstrates more severe springback behaviour than ordinary mild steels, it requires more efforts to meet the design specification of the stamped parts. Consequently, the physical fine tuning of the die design and the stamping process can be time consuming. The trial-and-error development process may be shortened by replacing most of the physical try-outs with finite e lement (FE) simulations of the forming process, including the springback behaviour. Still it can be hard to identify when a stamped part will lead to an acceptable assembly with respect to the geometry and the residual stress state. In part since the assembling process itself will distort the components. To resolve this matter it is here proposed to extend the FE-simulation of the stamping process, to also include the first level sub-assembly stage. In this study a methodology of sequentially simulating each step in the manufacturing process of an assembly is proposed. Each step of the proposed methodology is described, and a validation of the prediction capabilities is performed by comparing with a physically manufactured assembly. The assembly is composed of three sheet metal components made from DP600 steel which are joined by spot welding. The components are designed to exhibit severe springback behaviour in order to put both the forming and subsequent assembling simulations to the test. The work presented here demonstrates that by using virtual prototyping it is possible to predict the final shape of an assembled structure.

Lightweight components are in demand from the automotive industry, due to legislation regulating greenhouse gas emissions, e.g., CO2. Traditionally, lightweighting has been done by replacing mild steels with ultra-high strength steel. The development of micro-sandwich materials has received increasing attention due to their formability and potential for replacing steel sheets in automotive bodies. A fundamental requirement for micro-sandwich materials to gain significant market share within the automotive industry is the possibility to simulate manufacturing of components, e.g., cold forming. Thus, reliable methods for characterizing the mechanical properties of the micro-sandwich materials, and in particular their cores, are necessary. In the present work, a novel method for obtaining the out-of-plane properties of micro-sandwich cores is presented. In particular, the out-of-plane properties, i.e., transverse tension/compression and out-of-plane shear are characterized. Test tools are designed and developed for subjecting micro-sandwich specimens to the desired loading conditions and digital image correlation is used to qualitatively analyze displacement fields and fracture of the core. A variation of the response from the material tests is observed, analyzed using statistical methods, i.e., the Weibull distribution. It is found that the suggested method produces reliable and repeatable results, providing a better understanding of micro-sandwich materials. The results produced in the present work may be used as input data for constitutive models, but also for validation of numerical models.

No abstract