This paper proposes a collaborative air traffic flow management (ATFM) framework, in the scope of trajectory based operations, aiming to improve the costefficiency for airspace users (AUs) when facing ATFM regulations. The framework consists of four modules. The first one involves the AUs initially scheduling their preferred trajectories for all their flights. Based on this initial demand, the second module (assumed to be on the Network Manager -NM-side) detects time-varying hotspots (i.e. overloaded sectors along the day). In the third module, hotspot information is shared back to the AUs who plan alternative trajectory options to avoid crossing these congested airspace volumes (in the lateral and vertical domain); as well as providing to the NM different pre-tactical delay management preferences (including ground holding, linear holding, air holding and pre-tactical delay recovery); based on their internal cost breakdown structures. Incorporating all these potential combined options, the last module computes the best trajectory selections and the optimal distribution of delay assignments, such that the cost deviation from the initial status (all the user-preferred trajectories) is minimized. This model is formulated as mixed integer linear programming (MILP) and validated by a real-world case study focused on 24 hours of traffic over the French airspace. Results using the proposed framework suggest a significant system delay reduction by nearly 97% over the existing method, whilst yielding an average of less than 100 kg extra fuel consumption and 50 Euro extra route charges for the 11% flights diverted to their alternative trajectories.

The ability to meet a controlled time of arrival during a continuous descent operation will enable environmentally friendly and fuel efficient descent operations while simultaneously maintaining airport throughput. However, if the wind forecast used to compute the initial trajectory plan is not accurate enough, the guidance system will need to correct time deviations from the plan during the execution of the descent. Previous work proposed an on-board guidance strategy based on model predictive control, which repeatedly updates the trajectory plan in real-time from the current aircraft state and for the remainder of the descent. However, the wind conditions downstream, at altitudes not explored yet, were difficult to predict due to the lack of data. This paper shows the potential benefits of using wind observations, broadcast by nearby aircraft, to reconstruct the wind profile downstream. The wind profile in the trajectory optimization problem is modeled as a spline, which control points are updated to fit the observations before re-planning the trajectory. Results from simulations using realistic wind data show that the performance of model predictive control significantly improves when including up-to-date wind observations, in terms of time and energy errors at the metering fix and fuel consumption.

This paper introduces a linear holding strategy based on prior works on cruise speed reduction, aimed at performing airborne delay at no extra fuel cost, as a complementary strategy to current ground and airborne holding strategies. Firstly, the equivalent speed concept is extended to climb and descent phases through an analysis of fuel consumption and speed from aircraft performance data. This gives an insight of the feasibility to implement the concept, differentiating the case where the cruise flight level initially requested is kept and the case where it can be changed before departure in order to maximize the linear holding time. Illustrative examples are given, where typical flights are simulated using an optimal trajectory generation tool where linear holding is maximized while keeping constant the initially planned fuel. Finally, the effects of linear holding are thoroughly assessed in terms of the vertical trajectory profiles, range of feasible speed intervals and trade-offs between fuel and time. Results show that the airborne delay increases significantly with nearly 3-fold time for short-haul flights and 2-fold for mid-hauls to the cases in prior works.Peer ReviewedPostprint (author's final draft

No abstract

Continuous descent operations with controlled times of arrival at one or several metering fixes could enable environmentally friendly procedures without compromising terminal airspace capacity. This paper focuses on controlled time of arrival updates once the descent has been already initiated, assessing the feasible time window (and associated fuel consumption) of continuous descent operations requiring neither thrust nor speed-brake usage along the whole descent (i.e. only elevator control is used to achieve different metering times). Based on previous works, an optimal control problem is formulated and numerically solved. The earliest and latest times of arrival at the initial approach fix have been computed for the descent of an Airbus A320 under different scenarios, considering the potential altitudes and distances to go when receiving the controlled time of arrival update. The effects of the aircraft mass, initial speed, longitudinal wind and position of the initial approach fix on the time window have been also investigated. Results show that time windows about three minutes could be achieved for certain conditions, and that there is a trade-off between robustness facing controlled time of arrival updates during the descent and fuel consumption. Interestingly, minimum fuel trajectories almost correspond to those of minimum time.Peer ReviewedPostprint (published version