We demonstrate precise linearization of ultrabroadband laser frequency chirps via a fiber-based self-heterodyne technique to enable extremely high-resolution, frequency-modulated cw laser-radar (LADAR) and a wide range of other metrology applications. Our frequency chirps cover bandwidths up to nearly 5 THz with frequency errors as low as 170 kHz, relative to linearity. We show that this performance enables 31-mum transform-limited LADAR range resolution (FWHM) and 86 nm range precisions over a 1.5 m range baseline. Much longer range baselines are possible but are limited by atmospheric turbulence and fiber dispersion.

Spectral hole-burning-based optical processing devices are proposed for coherent integration of multiple high-bandwidth interference patterns in a spectral hole-burning medium. In this implementation, 0.5 GHz spectral holographic gratings are dynamically accumulated in Er3+:Y2SiO5 at 4.2 K using a 1536 nm laser frequency stabilized to a spectral hole, along with commercial off-the-shelf components. The processed data, representing time delays over 0.5–2.0 μs, were optically read out using a frequency-swept probe; this approach makes possible the use of low-bandwidth, large-dynamic-range detectors and digitizers and enables competitive processing for applications such as radar, lidar, and radio astronomy. Coherent integration dynamics and material advances are reported.

As the bandwidth and linearity of frequency modulated continuous wave chirp ladar increase, the resulting range resolution, precisions, and accuracy are improved correspondingly. An analysis of a very broadband (several THz) and linear (<1 ppm) chirped ladar system based on active chirp linearization is presented. Residual chirp nonlinearity and material dispersion are analyzed as to their effect on the dynamic range, precision, and accuracy of the system. Measurement precision and accuracy approaching the part per billion level is predicted.

Using multiple temporally-overlapped, frequency offset and phase-tuned, linear frequency chirps, a new method of multi-GHz optical coherent transient optical pulse shaping and processing in inhomogeneously broadened rare-earth doped crystals is proposed. Using this technique with properly chirped laser sources, multi-GHz processing can be controlled with conventional low-bandwidth electronics and optical modulators. Specifically, this technique enables pulse shaping in the MHz to THz frequency regime with time-bandwidth-products exceeding 100,000, filling the gap between the operating regimes of femtosecond pulse shaping and analog electronics. The low bandwidth (~20 MHz) proof-of-concept demonstrations presented in this paper include pulse train creation, selfconvolution, auto-correlation, and chirped pulse compression.

The optical frequency sweep of an actively linearized, ultrabroadband, chirped laser source is characterized through optical heterodyne detection against a fiber-laser frequency comb. Frequency sweeps were measured over approximately 5 THz bandwidths from 1530 nm to 1570 nm. The dominant deviation from linearity resulted from the nonzero dispersion of the fiber delay used as a reference for the sweep linearization. Removing the low-order dispersion effects, the residual sweep nonlinearity was less than 60 kHz rms, corresponding to a constant chirp with less than 15 ppb deviation across the 5 THz sweep.