We have recently reported on the catalytic activity of sulfated iron and tin oxides for the direct liquefaction of coal (Energy Fuels 1991, 5, 497-507) and on the activity of the soluble precursor, Fe(CO)6, for coprocessing of Illinois No. 6 coal with Maya ATB residuum (650 °F+) (Energy Fuels 1990, 4, 231-237). This paper addresses the activity and characterization of finely dispersed ironand molybdenum-containing catalysts based on the soluble precursors Fe(CO)5 and Mo(CO)6, and on the finely divided (average crystallite size of 30-80 A) sulfated metal oxide superacids such as Fe203/S042_ and Sn02/S042' for coprocessing reactions. The catalysts were characterized and tested for activity with various coals and Maya ATB heavy oil (650 °F) in coprocessing reactions. The following catalyst-coal combinations are reported: Fe(CO)5 with three premium Argonne coals; Mo(CO)6 and Mo naphthenate with Illinois No. 6; mixtures of Fe(CO)6 and Mo(CO)6 with Illinois No. 6; sulfated iron and tin oxides with Illinois No. 6; and a new catalyst, Mo-promoted sulfated iron oxide, with Illinois No. 6 coal. The use of a newly synthesized bimetallic catalyst, Mo/Fe203/S042", consisting of 50 ppm Mo and 3500 ppm iron, gave a 78% conversion of Illinois No. 6 coal to methylene chloride soluble products with a selectivity to oils of 80 wt % at 400 °C. The following order of catalyst activity (the yield of n-pentane-soluble products is referred to here as "activity") was observed for coprocessing reactions carried out with Illinois No. 6 coal and Maya ATB oil at 400 °C: Mo/ Fe203/S042' > Fe203/S042", Fe(CO)5/Mo(CO)6 > Mo(CO)6 > Fe(CO)5. The addition of elemental sulfur to the coal-oil mixture prior to the coprocessing reactions did not show any notable effect on conversions. Both hydrodenitrogenation (-40 %) and hydrodesulfurization (-60 %) were obtained with iron-molybdenum bimetallic catalysts based on sulfated oxides. We believe that the sulfate group in these catalysts helps to prevent sintering or agglomeration of catalysts at high temperatures. The high surface acidity of the catalyst may influence the nature of the reactions that occur in the early stages of coprocessing reactions but the catalyst activity is mainly due to the easy accessibility of the dissolved coal, heavy oil, and H2 to the small catalyst particles.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2025 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.