Efficient power splitting is a fundamental functionality in silicon photonic integrated circuits, but state-of-the-art power-division architectures are hampered by limited operational bandwidth, high sensitivity to fabrication errors or large footprints. In particular, traditional Y-junction power splitters suffer from fundamental mode losses due to limited fabrication resolution near the junction tip. In order to circumvent this limitation, we propose a new type of high-performance Y-junction power splitter that incorporates subwavelength metamaterials. Full three-dimensional simulations show a fundamental mode excess loss below 0.1 dB in an ultra-broad bandwidth of 300 nm (1400–1700 nm) when optimized for a fabrication resolution of 50 nm, and under 0.3 dB in a 350 nm extended bandwidth (1350–1700 nm) for a 100 nm resolution. Moreover, analysis of fabrication tolerances shows robust operation for the fundamental mode to etching errors up to ± 20 nm. A proof-of-concept device provides an initial validation of its operation principle, showing experimental excess losses lower than 0.2 dB in a 195 nm bandwidth for the best-case resolution scenario (i.e., 50 nm).

No abstract

On-chip mode converters and multiplexers are fundamental components to scale the capacity of silicon optical interconnects by using different spatial modes of waveguides. Recently, we proposed a low loss and compact mode converter and multiplexer consisting of a subwavelength-engineered multimode interference coupler, tapered waveguides as phase shifter and a symmetric Y-junction. However, the narrow spectral response of the tapered phase shifter limited the device crosstalk performance. In this work, we demonstrate that the use of a subwavelength grating phase shifter with low phase-shift errors substantially reduces the crosstalk and expands the operational bandwidth. A complete multiplexer-demultiplexer link consisting of two devices in back-to-back configuration was fabricated in a 220-nm siliconon-insulator platform. Experimental measurements of the complete link show insertion loss below 2 dB and crosstalk less than -17 dB over a bandwidth of 245 nm (1427 -1672 nm).