No abstract

This article has been accepted for publication in IEEE Transactions on Industry Applications. "© © 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works."Copyright © and Moral Rights are retained by the author(s) and/ or other copyright owners. A copy can be downloaded for personal non-commercial research or study, without prior permission or charge. This item cannot be reproduced or quoted extensively from without first obtaining permission in writing from the copyright holder(s). The content must not be changed in any way or sold commercially in any format or medium without the formal permission of the copyright holders. Abstract -It has been shown in the past that the zerosequence current spectrum can be reliably used to detect broken bar faults in induction motors. Previous work was carried out with extensive FEM analysis. Although it allows detailed study of spatial and time-dependent electromagnetic characteristics of induction motors, FEM is a heavily timeconsuming tool and this limits full study. So, in this work, extensive experimental testing has been performed to validate the zero sequence current spectrum for detecting rotor asymmetries. Three identical induction motors have been used: one healthy, one with a broken rotor bar, and one with two broken rotor bars. The motors were tested under different voltage supply levels and with different mechanical loads. The zero-sequence current spectrum was calculated after measuring the three phase currents. It is for the first time experimentally shown that this approach offers greater diagnostic potential than traditional MCSA. CURVE is the Institutional Repository for Coventry University

This article has been accepted for publication in IEEE Transactions on Industry Applications. "© © 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works."Copyright © and Moral Rights are retained by the author(s) and/ or other copyright owners. A copy can be downloaded for personal non-commercial research or study, without prior permission or charge. This item cannot be reproduced or quoted extensively from without first obtaining permission in writing from the copyright holder(s). The content must not be changed in any way or sold commercially in any format or medium without the formal permission of the copyright holders. Abstract -It has been shown in the past that the zerosequence current spectrum can be reliably used to detect broken bar faults in induction motors. Previous work was carried out with extensive FEM analysis. Although it allows detailed study of spatial and time-dependent electromagnetic characteristics of induction motors, FEM is a heavily timeconsuming tool and this limits full study. So, in this work, extensive experimental testing has been performed to validate the zero sequence current spectrum for detecting rotor asymmetries. Three identical induction motors have been used: one healthy, one with a broken rotor bar, and one with two broken rotor bars. The motors were tested under different voltage supply levels and with different mechanical loads. The zero-sequence current spectrum was calculated after measuring the three phase currents. It is for the first time experimentally shown that this approach offers greater diagnostic potential than traditional MCSA. CURVE is the Institutional Repository for Coventry University