The effectiveness of material to emit energy as thermal radiation is important in determining the apparent temperature in infrared thermographic measurements. For this reason, a number of measurements of the thermal emissivity in the mid-infrared thermographic (8–12 µm) region have been reported for fabrics. However, many fabrics adsorb moisture from the air, and condensed water has a relatively high thermal emissivity. In this manuscript, we report measurements of adsorption isotherms and mid-infrared thermal emissivity for nylon, cotton, polyester, and acrylic as a function of their moisture content in weight percent at temperatures just above ambient. We find that the order of water mass percentage gain for the fabrics in high humidity conditions are polyester < acrylic < nylon < cotton. The thermal emissivity is ∼0.88 independent of moisture content for the fabrics polyester, cotton, and nylon, while acrylic shows a pronounced increase in thermal emissivity as moisture content increases, ranging from ɛ ∼ 0.81 at low humidity conditions to ɛ ∼ 0.88 under high humidity conditions. In this work, emissivity measurements are made by imaging through a novel infrared window made from household cling wrap and interpreted with equations that are independent of window transmittance and sample temperature.

No abstract

Attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) was used to detect blood stains based on signature protein absorption in the mid-IR region, where intensity changes in the spectrum can be related to blood concentration. Partial least squares regression (PLSR) was applied for multivariate calibrations of IR spectra of blood dilutions on four types of fabric (acrylic, nylon, polyester, and cotton). Gap derivatives (GDs) were applied as a preprocessing technique to optimize the performance of calibration models. We report a much improved IR detection limit (DL) for blood on cotton (2700× in dilution factor units) and the first IR DL reported for blood on nylon (250×). Due to sample heterogeneity caused by fabric hydrophobicity, acrylic fabric produced variable ATR FT-IR spectra that caused poor DLs in concentration units compared to previous work. Polyester showed a similar problem at low blood concentrations that lead to a relatively poor DL as well. However, the increased surface sensitivity and decreased penetration depth of ATR FT-IR make it an excellent choice for detection of small quantities of blood on the front surface of all fabrics tested (0.0010 µg for cotton, 0.0077 µg for nylon, 0.011 µg for acrylic, and 0.0066 µg for polyester).

Thermal imaging is not ordinarily a good way to visualize chemical contrast. In recent work, however, we observed strong and reproducible images with chemical contrasts on blood-stained fabrics, especially on more hydrophobic fabrics like acrylic and polyester.

No abstract