Carbon nanotubes (CNTs) are extremely conductive and flexible, making them ideal for applications such as flexible electronics and nanoelectromechanical systems. However, in order to properly apply them in such devices, their long-term durability must be assessed. In the present study, we demonstrate cyclic loading of a thick MWCNT (175 nm) under axial compression, observed in situ under a transmission electron microscope (TEM). The force was applied via controlled displacement, while real-time TEM videos of the deformation process were gathered to produce the morphological data. The in situ observations combined with force–displacement curves revealed the onset of buckling instabilities, and the elastic limits of the tube were assessed. The MWCNT retained its original structure even after 68 loading–unloading cycles, despite observed clues for structural distortions. The stiffness of the tube, calculated after each loading cycle, was in a 0.15 to 0.28 TPa range—comparable to the literature, which further validates the measurement set-up. These in situ tests demonstrate the resilience of CNTs to fatigue which can be correlated with the CNTs’ structure. Such correlations can help tailoring CNTs’ properties to specific applications.

Focused Ion Beam (FIB) is one of the most common methods for nanodevice fabrication. However, its implications on mechanical properties of polymers have only been speculated. In the current study, we demonstrated flexural bending of FIB-milled epoxy nanobeam, examined in situ under a transmission electron microscope (TEM). Controllable displacement was applied, while real-time TEM videos were gathered to produce morphological data. EDS and EELS were used to characterize the compositions of the resultant structure, and a computational model was used, together with the quantitative results of the in situ bending, to mechanically characterize the effect of Ga+ ions irradiation. The damaged layer was measured at 30 nm, with high content of gallium (40%). Examination of the fracture revealed crack propagation within the elastic region and rapid crack growth up to fracture, attesting to enhanced brittleness. Importantly, the nanoscale epoxy exhibited a robust increase in flexural strength, associated with chemical tempering and ion-induced peening effects, stiffening the outer surface. Young’s modulus of the stiffened layer was calculated via the finite element analysis (FEA) simulation, according to the measurement of 30 nm thickness in the STEM and resulted in a modulus range of 30–100 GPa. The current findings, now established in direct measurements, pave the way to improved applications of polymers in nanoscale devices to include soft materials, such as polymer-based composites and biological samples.

Optimizing conductive ink for Direct-Write Additive Manufacturing, this work explores the effect of carboxylic functionalization of multi-walled carbon nanotubes on their affinity to silver nanoparticles deposited on them. We show a correlation between functionalization and the size of the resulted NPs: the diameter of the silver NPs deposited on pristine CNTs (∼5 nm diameter) is third of that of NPs deposited on functionalized CNTs (∼15 nm). Electrical characterization of the silver-decorated CNT-based ink shows a more significant improvement in conductivity of the functionalized CNTs-decorated with silver compared to the pristine one (maximal ∼40 and ∼20% increase in conductivity over their undecorated counterpart, respectively). However, CNT functionalization severely damages the conductivity of the CNTs themselves, resulting in a much lower conductivity. This “double-edged sword” effect of functionalization results in the highest absolute specific conductivity (3.79 × 103 S/m) achieved by decorating pristine CNTs with 25 wt% of silver. Nevertheless, the observed enhanced conductivity and the ability to control the composite’s morphology by functionalization allow fine-tuning of morphology-based properties, such as surface enhanced Raman scattering and optimization of the ink for sensing applications.