No abstract

No abstract

This paper presents a non-destructive technique (NDT) using active infrared thermography and FEM analyses with Comsol Multiphysics software applied for thermal distribution detection through reinforced concrete. For this work a reinforced concrete slab was created having a parallelepiped shape, the length and the width of 400 mm and the thickness of 50 mm. The concrete slab was reinforced using a rebar mesh of 18 mm diameter. The experimental installation consisted of an electrical heating source and a steel frame for fixing the slab and for the thermal distribution analyses an infrared camera was used. The same type of material and conditions like in the laboratory was used for the FEM analyses in Comsol Multiphysiscs to compare with the experimental part. A concrete slab without steel was used to determine the difference between the simple concrete and reinforced concrete in the heat transfer process.

The present paper presents an optimization model for quality control of industrial products by using two non-destructive techniques (NDT): infrared termography and ultrasonic methods. The main purpose it is to determinate the best analyzing method using multi-criteria analysis by taking into account the results that outcome from the two non-destructive evaluations. There have been studied defects like: internal defects and surface defects. Therewith were taking into consideration: safety, efficiency of the method and the cost of the equipment used in controlling the product. For this study it was created a concrete slab with embedded defects which had different depths. The sample was tested using active thermography and impact echo methods and the results were studied and integrated in an multi-criteria analysis to reveal the best method for this case.