As part of research to develop a highly durable concrete container for radioactive waste disposal in chloride and sulfate bearing granite groundwaters, a variety of cement pastes were studied. A sulfate resisting portland cement was used with various replacement levels of Class F fly ash and pelletized blast furnace slag at a water to solids ratio (W/S) = 0.36. Blends with fly ash, slag, and silica fume were also combined with a super water reducer at W/S = 0.25. Results are presented for strength development, permeability to water, and pore size distribution after 7, 28, 91, and 182 days moist curing. As a direct measure of durability, after 91 days moist curing, paste prisms were immersed in both de-ionized water and a synthetic chloride and sulfate bearing groundwater at 70°C.
While all three supplementary cementing materials (mineral admixtures) reduced ultimate permeabilities, silica fume was more effective in reducing permeability at early ages. Silica fume was also the most effective in reducing calcium hydroxide contents of the pastes while slag was the least effective; only reducing calcium hydroxide levels by dilution of the portland cement. From preliminary analysis, there does not appear to be a way of accurately predicting permeability from porosity or pore size parameters alone.
Chloride threshold value is an important input parameter in service life predictions. There has been a need for a reliable method for testing this value in order to improve the understanding of basic factors influencing the corrosion initiation. For this reason RILEM technical committee (TC) 235-CTC was formed with the ultimate aim to recommend a suitable test method capable of delivering data with acceptable measurement uncertainty. During the TC’s life, a test method was proposed and a Round-Robin Test (RRT) was organised to evaluate it. Due to the unexpected results from the RRT, the ultimate aim of the TC was not reached. There were some experiences obtained from the TC’s work especially in designing the test method which are worthy for supporting future researchers continuing to search for a reliable test method for it. This technical letter presents the TC’s experiences.
A wide variety of materials are currently used as supplementary cementitious materials (SCMs) for concrete, including natural materials and byproducts from various industries. Historically, natural SCMs, mostly derived from volcanic deposits, were common in concrete. In recent years, the dominant SCMs have been industrial by-products such as fly ash, ground granulated blast furnace slag (GGBFS), and silica fume. There is currently a resurgence of research into historic and natural SCMs, as well as other alternative SCMs for many reasons. The primary benefits of SCM use in improvement of long-term mechanical performance, durability, and sustainability are widely accepted, so local demand for these materials can exceed supply. This paper describes some of the SCMs that are attracting attention in the global research community and the properties and characteristics of these materials that affect their performance. Special attention is paid to the importance and demands of material characterization. Many SCMs do not necessarily lend themselves to characterization methods used in standardized test methods, which sometimes fail to describe the properties that are most important in predicting reactivity.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.