International audiencePerforming a single but complex mechanical test on small structures rather than on coupons to probe multiple strain states / histories for identification purposes is nowadays possible thanks to full-field measurements. The aim is to identify many parameters thanks to the heterogeneity of mechanical fields. Such an approach is followed herein, focusing on a blade root made of 3D woven composite. The performed test, which is analyzed using global digital image correlation, provides heterogeneous kinematic fields due to the particular shape of the sample. This displacement field is further processed to identify the four in-plane material parameters of the macroscopic equivalent orthotropic behavior. The key point, which may limit the ability to draw reliable conclusions, is the presence of acquisition noise in the original images that has to be tracked along the DIC / identification processing to provide uncertainties on the identified parameters. A further regularization based on a priori knowledge is finally introduced to compensate for possible lack of experimental information needed for completing the identification

a b s t r a c tIt is proposed to develop a digital image correlation procedure that is suitable for beams whose kinematics is described by an Euler-Bernoulli hypothesis. As a direct output, the degrees of freedom corresponding to flexural and axial loads are directly measured. The performance of the correlation algorithm is evaluated by using a picture of a cantilever beam experiment. One load level is analyzed with the present algorithm. The latter is validated by comparing the displacement field with that given by a finite element based correlation algorithm. It is also shown that a locally buckled zone is detectable with the present procedure.