No abstract

Successful immunization often requires a primer, and after a certain lag time, a booster administration of the antigen. To improve the vaccinees' comfort and compliance, a single-injection vaccine formulation with a biphasic pulsatile release would be preferable. Previous work has shown that such a release profile can be obtained with compacts prepared from physical mixtures of various poly(dl-lactic(-co-glycolic) acid) types (Murakami et al., 2000). However, the mechanism behind this release profile is not fully understood. In the present study, the mechanism that leads to this biphasic pulsatile release was investigated by studying the effect of the glass transition temperature (Tg) of the polymer, the temperature of compaction, the compression force, the temperature of the release medium, and the molecular weight of the incorporated drug on the release behavior. Compaction resulted in a porous compact. Once immersed into release medium with a temperature above the Tg of the polymer, the drug was released by diffusion through the pores. Simultaneously, the polymer underwent a transition from the glassy state into the rubbery state. The pores were gradually closed by viscous flow of the polymer and further release was inhibited. After a certain period of time, the polymer matrix ruptured, possibly due to a build-up in osmotic pressure, resulting in a pulsatile release of the remaining amount of drug. The compression force and the molecular weight of the incorporated drug did not influence the release profile. Understanding this mechanism could contribute to further develop single-injection vaccines.

For many vaccines, multiple injections are required to confer protective immunity against targeted pathogens. These injections often consist of a primer administration followed by a booster administration of the vaccine a few weeks or months later. A single-injection vaccine formulation that provides for both administrations could greatly improve the convenience and vaccinee’s compliance. In this study, we developed parenterally injectable core-shell microspheres with a delayed pulsatile release profile that could serve as the booster in such a vaccine formulation. These microspheres contained bovine serum albumin (BSA) as the model antigen and poly(dl-lactide-co-glycolide) (PLGA) with various dl-lactide:glycolide monomer ratios as the shell material. Highly monodisperse particles with different particle characteristics were obtained using a microfluidic setup. All formulations exhibited a pulsatile in vitro release of BSA after an adjustable lag time. This lag time increased with the increasing lactide content of the polymer and ranged from 3 to 7 weeks. Shell thickness and bovine serum albumin loading had no effect on the release behavior, which could be ascribed to the degradation mechanism of the polymer, with bulk degradation being the main pathway. Co-injection of the core-shell microspheres together with a solution of the antigen that serves as the primer would allow for the desired biphasic release profile. Altogether, these findings show that injectable core-shell microspheres combined with a primer are a promising alternative for the current multiple-injection vaccines.

Although vaccination is still considered to be the cornerstone of public health care, the increase in vaccination coverage has stagnated for many diseases. Most of these vaccines require two or three doses to be administered across several months or years. Single-injection vaccine formulations are an effective method to overcome the logistical barrier to immunization that is posed by these multiple-injection schedules. Here, we developed subcutaneously (s.c.) injectable microspheres with a sustained release of the model antigen bovine serum albumin (BSA). The microspheres were composed of blends of two novel biodegradable multi-block copolymers consisting of amorphous, hydrophilic poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCL-PEG-PCL) blocks and semi-crystalline poly(dioxanone) (PDO) blocks of different block sizes. In vitro studies demonstrated that the release of BSA could be tailored over a period of approximately four to nine weeks by changing the blend ratio of both polymers. Moreover, it was found that BSA remained structurally intact during release. Microspheres exhibiting sustained release of BSA for six weeks were selected for the in vivo study in mice. The induced BSA-specific IgG antibody titers increased up to four weeks after administration and were of the same magnitude as found in mice that received a priming and a booster dose of BSA in phosphate-buffered saline (PBS). Determination of the BSA concentration in plasma showed that in vivo release probably took place up to at least four weeks, although plasma concentrations peaked already one week after administration. The sustained-release microspheres might be a viable alternative to the conventional prime-boost immunization schedule, but a clinically relevant antigen should be incorporated to assess the full potential of these microspheres in practice.