In this paper, based on the theory of rotor dynamics, the nonlinear dynamics of a rotor system with an eccentric rotor is analyzed. Taking the double-support rotor system with a single turntable as the object, the mathematical modeling method of the rotor system with an eccentric rotor and the rotation analysis of the turntable are analyzed in detail. According to ANSYS software, the influence of eccentricity on the rotor system and the relationship between eccentricity and nonlinearity are analyzed.

Purpose As a core rotating component of power machinery and working machinery, the rotor system is widely used in the fields of machinery, electric power and aviation. When the system operates at high speed, the system stability is of great importance. To enhance the system stability, squeeze film damper (SFD) is being installed in the rotor system to alleviate vibration. The purpose of this paper is to first classify the rotor system into two types, the dual rotor system and the single rotor system, and to comprehensively and specifically mention the method of generating the dynamic model. Next, based on the establishment of a dynamic model with and without SFD in the rotor system, the optimization design of the rotor system with SFD was carried out using a genetic algorithm. Through sensitivity analysis, SFD clearance, shaft stiffness and oil viscosity were determined as design variables of the rotor system, and the objective function was the minimization of the maximum amplitude of the rotor system with SFD within the operation speed range. Design/methodology/approach In this paper, first, the rotor system was classified into two types, namely, the dual rotor system and the single rotor system, and the method of creating a dynamic model was comprehensively and specifically mentioned. Here, the dynamic model of the rotor system was derived in detail for the single rotor system and the dual rotor system with and without SFD. Next, based on the establishment of a dynamic model with and without SFD in the rotor system, the optimization design of the rotor system with SFD was carried out using a genetic algorithm. The sensitivity analysis of the unbalanced response was carried out to determine the design variables of the optimization design. Through sensitivity analysis, SFD clearance, shaft stiffness and oil viscosity were determined as design variables of the rotor system, and the objective function was the minimization of the maximum amplitude of the rotor system with SFD within the operation speed range. Findings SFD clearance, shaft stiffness and oil viscosity were determined as design variables of the rotor system through sensitivity analysis of the unbalanced response. These three variables are basic factors affecting the amplitude of the rotor system with SFD. Originality/value In the existing studies, only a dynamic model of a single rotor system with SFD was created, and the characteristic values of pure SFD were selected as optimization variables and optimization design was carried out. But in this study, the rotor system was classified into two types, namely, the dual rotor system and the single rotor system, and the method of creating a dynamic model was comprehensively and specifically mentioned. In addition, optimization design variables were selected and optimized design was performed through sensitivity analysis on the unbalanced response of factors affecting the vibration characteristics of the rotor system.

The inclusion of aerospike on blunt nose body of hypersonic vehicle has been considered to be the simplest and most efficient technique for a concurrent reduction of both aeroheating and wave drag due to hypersonic speed. However, the thermal and mechanical behavior of aerospike structure under the coupling effect of aerodynamic force and aeroheating remains unclear. In this study, the thermal and structural response of aerospike mounted on the blunt nose body of hypersonic vehicle was numerically simulated by applying 3 D fluid-thermal-structural coupling method based on loosely-coupled strategy. In the simulation, the angle-of-attack and the spike’s length and diameter are differently set as α = 0°–10°, L/D = 1–2 and d/D = 0.05–0.15, respectively. Through the parametric study, the following results were obtained. Firstly, the increase of vehicle’s angle-of-attack and spike’s length unfavorably affect the thermal and structural response of aerospike. Secondly, the increase of spike’s diameter can improve its structural response characteristic. Finally, the aerospike with the angle-of-attack of 0° and the length and diameter of L/D = 1 and d/D = 0.15, respectively, is preferred in consideration of the effect of flight angle-of-attack and spike’s geometrical structure on the thermal and structural response of spike and the drag reduction of vehicle. The numerical calculation results provide a technical support for the safe design of aerospike.

No abstract