Polymer nanocomposites continue to receive tremendous attention for application in areas such as microelectronics, organic batteries, optics, and catalysis. We have discovered that physical dispersion of nonporous, nanoscale, fumed silica particles in glassy amorphous poly(4-methyl-2-pentyne) simultaneously and surprisingly enhances both membrane permeability and selectivity for large organic molecules over small permanent gases. These highly unusual property enhancements, in contrast to results obtained in conventional filled polymer systems, reflect fumed silica-induced disruption of polymer chain packing and an accompanying subtle increase in the size of free volume elements through which molecular transport occurs, as discerned by positron annihilation lifetime spectroscopy. Such nanoscale hybridization represents an innovative means to tune the separation properties of glassy polymeric media through systematic manipulation of molecular packing.

In contrast to the performance of traditional filled polymer systems, penetrant permeability coefficients in high-free-volume, glassy poly(4-methyl-2-pentyne) (PMP) increase systematically and substantially with increasing concentration of nonporous, nanoscale fumed silica (FS). For instance, the permeability of PMP containing 40 wt % FS to methane is 2.3 times higher than that of the unfilled polymer. Gas and vapor uptake in the PMP/FS nanocomposites is essentially unaffected by the presence of up to 40 wt % FS, while penetrant diffusion coefficients increase regularly with increasing filler content. This increase in diffusivity is responsible for elevated permeability in the PMP/FS nanocomposites. The addition of FS to PMP augments the permeability of large penetrants more than that of small gases, consistent with a reduction in diffusivity selectivity. Consequently, vapor selectivity in the nanocomposites increases with increasing FS concentration. Activation energies of permeation in PMP decrease with increasing FS content, suggesting that penetrant diffusive jumps require less energy at higher filler concentrations. Positron annihilation lifetime spectroscopy (PALS) reveals that FS subtly increases the free volume in PMP available for molecular transport. The accessible free volume measured by PALS correlates favorably with relative penetrant permeability in the nanocomposites. Transmission electron microscopy confirms that the FS nanoparticles are relatively well dispersed in PMP.

Due to their versatile properties, robust behavior, facile processability and low cost, organic polymers have become the material of choice for an increasing number of mature and cutting-edge technologies. In the last decade or so, a new class of polymers capable of responding to external electrical stimulation by displaying significant size or shape change has emerged. These responsive materials, collectively referred to as electroactive polymers (EAPs), are broadly classified as electronic or ionic according to their operational mechanism. Electronic EAPs generally exhibit superior performance relative to ionic EAPs in terms of actuation strain, reliability, durability and response time. Among electronic EAPs, dielectric elastomers exhibit the most promising properties that mimic natural muscle for use in advanced robotics and smart prosthetics, as well as in haptic and microfluidic devices. Elastomers derived from homopolymers such as acrylics and silicones have received considerable attention as dielectric EAPs, whereas novel dielectric EAPs based on selectively swollen nanostructured block copolymers with composition-tailorable properties have only recently been reported. Here, we provide an overview of various EAPs in terms of their operational mechanisms, uses and shortcomings, as well as a detailed account of dielectric elastomers as next-generation actuators.

No abstract

Freestanding, single-component dielectric actuators are designed based on bottlebrush elastomers that enable giant reversible strokes at relatively low electric fields and altogether avoid preactuation mechanical manipulation. This materials design platform allows for independent tuning of actuator rigidity and elasticity over broad ranges without changing chemical composition, which opens new opportunities in soft-matter robotics.