Incorporating mixed ion is a frequently used strategy to stabilize black-phase formamidinum lead iodide perovskite for high-efficiency solar cells. However, these devices commonly suffer from photoinduced phase segregation and humidity instability. Herein, we find that the underlying reason is that the mixed halide perovskites generally fail to grow into homogenous and high-crystalline film, due to the multiple pathways of crystal nucleation originating from various intermediate phases in the film-forming process. Therefore, we design a multifunctional fluorinated additive, which restrains the complicated intermediate phases and promotes orientated crystallization of α-phase of perovskite. Furthermore, the additives in-situ polymerize during the perovskite film formation and form a hydrogen-bonded network to stabilize α-phase. Remarkably, the polymerized additives endow a strongly hydrophobic effect to the bare perovskite film against liquid water for 5 min. The unencapsulated devices achieve 24.10% efficiency and maintain >95% of the initial efficiency for 1000 h under continuous sunlight soaking and for 2000 h at air ambient of ~50% humid, respectively.

Recently, organic–inorganic metal halide perovskite solar cells (PSCs) have achieved rapid improvement, however, the efficiencies are still behind the Shockley–Queisser theory mainly due to their high energy loss (ELOSS) in open‐circuit voltage (VOC). Due to the polycrystalline nature of the solution‐prepared perovskite films, defects at the grain boundaries as the non‐radiative recombination centers greatly affect the VOC and limit the device efficiency. Herein, poly(vinylidene fluoride) (PVDF) is introduced as polymer‐templates in the perovskite film, where the fluorine atoms in the PVDF network can form strong hydrogen‐bonds with organic cations and coordinate bonds with Pb2+. The strong interaction between PVDF and perovksite enables slow crystal growth and efficient defect passivation, which effectively reduce non‐radiation recombination and minimize ELOSS of VOC. PVDF‐based PSCs achieve a champion efficiency of 24.21% with a excellent voltage of 1.22 V, which is one of the highest VOC values reported for FAMAPb(I/Br)3‐based PSCs. Furthermore, the strong hydrophobic fluorine atoms in PVDF endow the device with excellent humidity stability, the unencapsulated solar cell maintain the initial efficiency of >90% for 2500 h under air ambient of ≈50% humid and a consistently high VOC of 1.20 V.

For achieving high‐performance p‐i‐n perovskite solar cells (PSCs), hole transporting materials (HTMs) are critical to device functionality and represent a major bottleneck to further enhancing device stability and efficiency in the inverted devices. Three dopant‐free polymeric HTMs are developed based on different linkage sites of triphenylamine and phenylenevinylene repeating units in their main backbone structures. The backbone curvatures of the polymeric HTMs affect the morphology and hole mobility of the polymers and further change the crystallinity of perovskite films. By using PTA‐mPV with moderate molecular curvature, p‐i‐n PSCs with high efficiency of 19.5% and long‐term stability can be achieved. The better performance is attributed to the more effective hole extraction ability, higher charge‐carrier mobility, and lower interfacial charge recombination. Furthermore, these three polymeric HTMs are synthesized without any noble metal catalyst, and show great advantages in future application owing to the low‐cost.